Push-Pull Type Toggle Clamps, Steel, for Push-On Clamping
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...show more
Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Item-no.
1162437
Supplier number
351-30-30-M8-EE-55
EAN
4045525595750
Quantity
1 Piece
Item-no.
1201062
Supplier number
351-50-20-M10-ES-70
EAN
4045525607903
Quantity
1 Piece
Item-no.
1201094
Supplier number
351-50-40-M10-ES-55
EAN
4045525596115
Quantity
1 Piece
The position of linear actuator connectors can be easily read from GN 711.2 rulers. The black background creates a high contrast to the natural-colored numbers and scales, and...show more
Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. In the two-part design, the door can be...show more
With split shaft collars GN 7072.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts. They can be assembled safely and easily with a high...show more
Shaft collars GN 705 essentially comply with the versions of DIN 705. GN 705 also contains a number of practical intermediate sizes in addition to the DIN-versions as well as...show more
Sheet metal hinges GN 136 are available in many different versions and are suitable for light to medium-duty applications.
Stainless steel sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments....show more
On slotted locknuts DIN 1804 the ground surface d3 stands proud and should be used as a mating surface. Sizes M45x1,5 to M60x1,5 have 6 slots. The official DIN standard sheet...show more
Slotted locknuts DIN 70852 serve for adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example. The flat design of the slotted...show more
Locking pins with axial lock GN 114.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...show more
Locking pins with axial lock GN 214.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...show more
Spacers GN 6220 are commonly used as spacing rods. They allow parts to be fastened with an offset parallel to their mounting plane. Type A is also used as a connecting nut. Any...show more
Elegant design taking account of ergonomic and hygienic requirements are the outstanding features of spoked handwheels GN 522.5. Owing to the materials used, they are especially...show more
With spring latches GN 722.2, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to...show more
Spring cotter pins GN 1024 are used for the axial fixing of bolts and axes and as distortion guard, e.g. for crown nuts DIN 935. Owing to their double winding, spring cotter...show more
Spring elements GN 513 are universal pressure elements used as detents, positioners or for clamping with spring pressure. The spring loaded nose can be used for a push-on or...show more
Item-no.
1484068
Supplier number
5337.2-25-M5-40
EAN
4045525669833
Quantity
1 Piece
Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.
Steckbolzen GN 114.7 mit Axialsicherung werden zum schnellen Fixieren, Verbinden und Sichern verschiedener Bauelemente eingesetzt. Eine typische Anwendung sind Lagerbolzen, die...show more