Abdeck- und Einfassprofile GN 70b werden in die Nut von Aluprofilen eingesetzt. Bei der Verwendung als Abdeckprofil werden sie mit der geschlossenen Seite nach außen verbaut. So...Meer tonen
Abdeck- und Einfassprofile GN 70i werden in die Nut von Aluprofilen eingesetzt. Bei der Verwendung als Abdeckprofil werden sie mit der geschlossenen Seite nach außen verbaut. So...Meer tonen
Abdeckkappen GN 60i schließen Aluprofile stirnseitig optisch ansprechend ab, schützen vor Verletzungen durch scharfe Schnittkanten und gegen das Eindringen von Staub und...Meer tonen
Art.-Nr.
1724423
Leveranciersnummer
60I-30606-P-KS
EAN
4045525931619
Aantal
1 stuk
Cover caps GN 934.1 are designed for hex nut and screw sizes according to DIN 933 / DIN 934. They protect from dirt and corrosion and attractively cover projecting screws and...Meer tonen
Cover caps GN 60b make a visually appealing closure for the end faces of aluminum profiles, protecting against injuries from sharp cut edges and preventing the ingress of dust...Meer tonen
Cover disks GN 226.1 not only improve the appearance of the knurled handwheels GN 226 , but also widen the range of applications. Apart from the standard symbol, diagrams and or...Meer tonen
Components with cylindrical mounting surfaces which are installed in hygienic areas can be sealed and mounted without dead spaces using sealing rings GN 7600. All standard parts...Meer tonen
Edge protection seal profiles GN 2182 can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded...Meer tonen
Dust caps GN 710 prevent the entering of dirt into angled ball joints DIN 71802.
Art.-Nr.
1211545
Leveranciersnummer
710-13,5
EAN
4045525357037
Aantal
1 stuk
Spacer disks and foot disks GN 438 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398819
Leveranciersnummer
438-32-9-5-B-70
EAN
4045525434400
Aantal
1 stuk
Art.-Nr.
1398827
Leveranciersnummer
438-50-11-6-B-70
EAN
4045525434486
Aantal
1 stuk
Spacer disks and foot disks GN 438.5 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398845
Leveranciersnummer
438.5-32-9-5-A-70
EAN
4045525434660
Aantal
1 stuk
Art.-Nr.
1398861
Leveranciersnummer
438.5-64-26-6-A-70
EAN
4045525434820
Aantal
1 stuk
Art.-Nr.
1398863
Leveranciersnummer
438.5-64-5-6-A-70
EAN
4045525434844
Aantal
1 stuk
Spacers GN 6226 are certified according to EHEDG and DGUV Test guidelines and are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead...Meer tonen
Tolerances of chamfers, different sheet metal thicknesses or the use of seals could mean that the mounting surfaces of the hinges on the frame and door do not have the desired...Meer tonen
With this adjustable knob GN 700 a shaft can be infinitely adjusted in both directions. The anti-backlash mechanism with a max. load of 15 Nm ensures the firm locking of the...Meer tonen
Adjustment plates GN 2277.1 are used in combination with bull´s eye spirit levels GN 2277, Type A. The mounting bore holes offset by 120° allow the bull‘s eye spirit levels and...Meer tonen
With side clamps GN 9190.1, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen
With side clamps GN 9190.2, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen