The dimensions of stainless steel retaining rods GN 480.3 are tailored for use with mounting clamps. The angled stainless steel retaining rods make it possible to create compact...Meer tonen
Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations. This has a positive impact on the lifetime of machines and...Meer tonen
Stainless steel mini indexing plungers GN 822.9 are distinguished for their small dimensions. The stainless steel mini indexing plungers present an affordable alternative to the...Meer tonen
Latches GN 115.1 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. They are...Meer tonen
Owing to the U-rail and the cover, oil level indicators GN 654 are extremely stable and are therefore suitable for great lengths. The fluid level can also be viewed from the...Meer tonen
Art.-Nr.
1294149
VPE (Verpakking)
5 stuk
Aantal
1 stuk
The following guidelines of lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table: The eye bolt must be of fully screwed in to...Meer tonen
Swing bolts GN 1524 offer a longer threaded bolt contrary to DIN 444. For stocking purposes cylinder head shoulder bolts GN 732.1 can be used for the sizes M8, M10 and M12.
Cabinet U-handles GN 425.3 are made of bent steel sections and are affixed by welding. The holes d2 serve, if necessary, for inserting dowel pins or guide pins that provide a...Meer tonen
Mushroom Shaped Knobs, Plastic
Position indicators GN 000.3 have been shaped for installation into different operating elements. The salient features of these counters are: The housing, the hand spindle, and...Meer tonen
Positioning elements GN 409.1 with threaded stud are designed for use as locating plungers, stops and thrust blocks.
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...Meer tonen
Latch type toggle clamps GN 851.3 are compact in design and can be used to ensure high holding capacities. When closing the spanner, a safety hook positively locks onto the...Meer tonen
The rotary clamping latches GN 516 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen
Hinges GN 237.1 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the fastening holes.
Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust. Types A and S are fastened by welding or using holes created by the customer. Type S also has a...Meer tonen
Hinges, Plastic, White
Swivel clamp connector joints GN 281 are an assembly of the swivel clamp connectors GN 271 and GN 275. The clamping bore is mechanically machined and designed for construction...Meer tonen
Leveling feet GN 345 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
The handle in the handwheels GN 521.6 is locked in a conical bore in the operating position. For reversal, it must first be pulled from the cone in axial direction. A pressure...Meer tonen
Handwheels GN 323.8 have a recessed hub to accept position indicators GN 000.8 / GN 000.3. The hub dimensions (for fitting) correspond to those of disc handwheels GN 323 and/or...