Torque limiting knurled knobs GN 5910 are used when the manually applied torque is to be limited. The torque limit can be set between 0.2 Nm and 1 Nm. When turned clockwise, the...Meer tonen
The knurled knobs GN 7336 are also available without threaded insert, including removable cover cap, allowing them to be fitted with specific inserts by the user. The insert...Meer tonen
The softline coating makes the knurled knobs GN 4534 particularly user-friendly and ergonomic. The soft, slip-proof contact area improves the contact both in hot (hand...Meer tonen
Knurled Nuts, Bushing Steel Zinc Plated
Knurled Nuts, Bushing Stainless Steel
Knurled Screws, Threaded Stud Steel
Knurled Screws, Threaded Stud Stainless Steel
Knurled screws GN 421.11 have a ball pin whose diameter is smaller than the core diameter of the thread.
Knurled screws GN 421.12 have a ball pin whose diameter is smaller than the core diameter of the thread. The movable thrust pad is easily clipped on and taken off. The thrust...
Quick release knurled nuts GN 6303.1 are used in such applications where the nut has to be completely removed after the releasing operation and re-fitted rapidly for...Meer tonen
Knurled nuts GN 827.1 are used with adjusting screws GN 827 to secure settings and positions in place by counterlocking. For processing and assembly equipment on which...Meer tonen
Bore diameter and plane face of the steel bushing in the handwheels GN 555 are machined only after pressing and clamped at the ring, ensuring a good concentricity and plane run...Meer tonen
The handle in these handwheels is locked in a conical bore in the operating position. For reversal, it must first be pulled from the cone in axial direction. A pressure spring...Meer tonen
Art.-Nr.
1215409
Leveranciersnummer
924.3-140-K14-R-SW
EAN
4045525678149
Aantal
1 stuk
Art.-Nr.
1215413
Leveranciersnummer
924.3-160-B14-R-SW
EAN
4045525618619
Aantal
1 stuk
Art.-Nr.
1215427
Leveranciersnummer
924.3-200-K20-R-SW
EAN
4045525678248
Aantal
1 stuk
The handwheels GN 924.7 are suitable for applications where the handle must not remain in the operating position. In order to bring the handle into this position it has to be...Meer tonen
Ledge handles GN 130 with bore hole B 4,5 are intended for fixing with self-tapping screws of thread size ST 4,8 such as pan head self-tapping screws DIN ISO 7049. The forces F1...Meer tonen
Ledge handles GN 130.3 with bore B 4,5 are intended for fastening with tapping screws of thread size ST 4,8, such as pan head self-tapping screws DIN ISO 7049.
Stainless steel gripping trays GN 7332 can be easily and quickly installed from the front using countersunk screws or from the back with grub screws. Stainless steel gripping...Meer tonen
The design of the gripping trays GN 731 matches the product family of Ergostyle®. Gripping trays with housing seal (identification no. 2) prevent the penetration of any dirt or...Meer tonen
Three-lobed knobs GN 5342 are manufactured from an antimicrobial plastic. Adding a silver-based substance has created a natural active agent that helps to prevent the growth of...Meer tonen
Three-lobed knobs GN 5342 are made of blue plastic granulate that is FDA compliant as per FDA CFR.21 and EU 10/2011 as well as visually detectable or metal detectable. The blue...Meer tonen
Three-lobed knobs GN 5345 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high...