Cabinet U-handles GN 528 are offered in various plastic versions. Cabinet U-handles of the type PP (Polypropylene) are, however, less viable from a mechanical and thermal...Meer tonen
Star knobs GN 6336.5 comply with DIN 6336 type L.
For mounting gripping trays GN 731.1 are no fixing screws required. The values of the load capacities F1 and F2 were tested with wall thickness s = 1.5 mm.
Cabinet U-handles GN 425.3 are made of bent steel sections and are affixed by welding. The holes d2 serve, if necessary, for inserting dowel pins or guide pins that provide a...Meer tonen
Star Knobs, Cast Iron, Threaded Stud Steel
Star knobs GN 6336.2 with all stainless steel bushing (main dimensions of DIN 6336) have important advantages: The face of the bushing is exactly square to the bore and is with...Meer tonen
Star knobs with threaded stud GN 5337.13 can be captively attached to a base element with the help of a ball chain. The star knobs with threaded stud are supplied ready...
Adjustable hand levers GN 303.1 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever...Meer tonen
Cabinet U-handles GN 425 are manufactured from a bent stainless steel profile. Cabinet U-handles with Ø d1 = 6, 8 and 10 are delivered with two location disks to ensure proper...Meer tonen
When ball knobs DIN 319 type L and M are used the shaft does not require a thread. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place,...Meer tonen
Position indicators GN 000.3 have been shaped for installation into different operating elements. The salient features of these counters are: The housing, the hand spindle, and...Meer tonen
Handwheels GN 323.8 have a recessed hub to accept position indicators GN 000.8 / GN 000.3. The hub dimensions (for fitting) correspond to those of disc handwheels GN 323 and/or...
Star Knobs, Stainless Steel
Knurled nuts DIN 466 are suitable for universal use and can be tightened and loosened easily without tools. A nut with thread M12 is also available in addition to the types...
The position of linear actuator connectors can be easily read from GN 711.2 rulers. The black background creates a high contrast to the natural-colored numbers and scales, and...Meer tonen
Stainless steel tension levers GN 212 are used as clamping element as well as operating levers.
Adjustable hand levers GN 604 like all the products of the Ergostyle® family are renowned for their good style but also their ergonomical shape. Pulling the lever disengages the...Meer tonen
Cylindrical knobs GN 519.2 are an advanced development of the Duroplast cylindrical knobs GN 519. Thanks to the polyamide material used in their manufacture, they feature superb...
Going beyond the DIN standard, handwheels DIN 950 are also available with Ø d1 = 180 and in types F and D with fixed or revolving handle.
The folding handles with recessed tray GN 425.8 are used if the handle is to protrude by a maximum of 3 mm when folded down. In type A, the folding handle is held in both end...Meer tonen
Gear lever handles GN 310 are highly universal options for movement and operation. Actuation of hydraulic valves and control levers eccentric cams are example uses of these...
Stainless Steel Finger Handles
The design of the cranked handles GN 670.2 matches the product family Ergostyle®. Attaching the cranked handle on a shaft using a transverse pin or a set screw is made easier...Meer tonen
The design of the ball handles GN 675 matches the product family of the Ergostyle®. The Softline coating makes the control knobs particularly user-friendly and ergonomic. The...Meer tonen