When using the cylindrical knobs GN 519, make sure that the threaded pin is not too short. Otherwise the plastic element may break under excessive stress exposure.
The cylindrical knobs GN 519.1 do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end...Meer tonen
Clamping Levers, Stainless Steel
Besides the standard scale (coding MCRS) the scale rings can be supplied with any type of graduation. It is suggested to use the matte chrome plated version (MCR) so that a nice...Meer tonen
Steel revolving handles GN 598 are mainly used on safety handwheels to increase imbalance and thus avoid free wheeling.
Typical in design are the revolving handles GN 798.2 with their stepped shape consisting of two cylinders giving the operator a better grip.
Control knobs GN 526 have a colored cover that conceals protruding or recessed shafts and is suitable for imprinting characters or symbols, if desired. For assembly, the cover...Meer tonen
Besides the standard scale (Type S) the control knobs GN 626 can be supplied with any type of graduation. Regarding design, numbering run, numbering position and numbering...Meer tonen
The underside of the three-lobed knob screws GN 5342 is not recessed, which meets the requirements of a "hygienic" version.
Hand knobs DIN 6335 with bore H7 are available as GN 6335.1. The size 100 is not on the official DIN standard sheet.
Knurled Screws, Threaded Stud Stainless Steel
Knurled screws GN 421.11 have a ball pin whose diameter is smaller than the core diameter of the thread.
Knurled handwheels GN 226 are mainly used instead of star and hand knobs for light adjusting or clamping applications.
Cabinet U-handles GN 565.3 are manufactured from a bent aluminum profile. They are suitable for applications where lower lifting forces are required such as on lids or...Meer tonen
Arch Handles, Stainless Steel
Cabinet U-handles GN 425 are manufactured from a bent steel profile. Cabinet U-handles with Ø d1 = 6, 8 and 10 are delivered with two location disks to ensure proper contact of...Meer tonen
Cabinet U-handles GN 628.1 are manufactured from an antimicrobial plastic. Adding a silver-based substance has created a natural active agent that helps to prevent the growth of...Meer tonen
Gear lever handles GN 310 are highly universal options for movement and operation. Actuation of hydraulic valves and control levers eccentric cams are example uses of these...
Cabinet U-handles GN 525 are known for their good design and the well proven eliptical profile. They meet the demand from an ergonomical angle.
Cabinet U-handles GN 628.5 are equipped with a 3/2-way valve or 5/2-way valve for controlling pneumatic circuits, and are operated by a button with a spring-loaded reset...Meer tonen
A special characteristic of the cabinet U-handles GN 559 is the thumb rest pad on the front of the leg. At the same time the extended leg offers an open ended version with wide...Meer tonen
Art.-Nr.
1352521
Leveranciersnummer
730.5-A4-120-GS
EAN
4045525131422
Aantal
1 stuk
The protruding steel bushing of cranked handles GN 570.1 ensures an accurate bore and square to bore face. It can be retained with a pin or a retaining screw. The link between...Meer tonen
Disk handwheels GN 520.1 are renowned in particular for the matte passivated aluminum ring. The tough, reinforced black plastic (Duroplast PF) and high gloss polished surface...Meer tonen