Slotted locknuts GN 1804.2 with thread locking can be secured against twisting by means of a cut thread segment using a grub screw d4. The thread flanks of the nut ensure...Meer tonen
Stainless steel spherical washers and dished washers DIN 6319 are used for clamping on non-parallel surfaces. Thanks to the material used, the spherical washers and dished...Meer tonen
Art.-Nr.
1486219
Leveranciersnummer
913.5-M10-80-MS
EAN
4045525753099
Aantal
1 stuk
Art.-Nr.
1486233
Leveranciersnummer
913.5-M8-63-MS
EAN
4045525756380
Aantal
1 stuk
Art.-Nr.
1351105
Leveranciersnummer
581-M6-A
EAN
4045525087132
Aantal
1 stuk
Art.-Nr.
1351106
Leveranciersnummer
581-M6-B
EAN
4045525087149
Aantal
1 stuk
Captive C-Washers DIN 6371 transfer the clamping force of screw or nut to the workpiece. After releasing the thread they can be swung away from the clamping point. They are...Meer tonen
Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as...Meer tonen
Thrust pads GN 6311.1 are used in conjunction with grub screws fitted with thrust point (grub screws DIN 6332, tommy screws DIN 6304 and DIN 6306) to transmit clamping force....Meer tonen
Thrust pads GN 631 are suitable for universal use and are combined with ball point grub screws GN 632.1. These can be easily pressed into the thrust pad and removed again, if...
Thrust pads GN 631 are suitable for universal use and are combined with ball point grub screws GN 632.5. These can be easily pressed into the thrust pad and removed again, if...
Art.-Nr.
1208932
Leveranciersnummer
631.5-25-7,8
EAN
4045525739673
Aantal
1 stuk
Stainless steel thrust pads GN 6311.1 are used in conjunction with grub screws fitted with thrust point (grub screws DIN 6332, tommy screws DIN 6304 and DIN 6306) to transmit...Meer tonen
Thrust springs GN 187.2 are installed between the serrated locking plates GN 187.4 or GN 189 and locking plates GN 187.5 and ensure secure separation of the serrated locking...
Spherical leveling washers GN 350.3 have been designed to match the leveling sets GN 350, GN 350.1, GN 350.2 and GN 350.5. The two spherical washers are used together...Meer tonen
Art.-Nr.
1828427
Leveranciersnummer
7045.2-M3-12-NI
EAN
4045525975132
Aantal
1 stuk
Art.-Nr.
1828430
Leveranciersnummer
7045.2-M4-20-NI
EAN
4045525975163
Aantal
1 stuk
Art.-Nr.
1828437
Leveranciersnummer
7045.2-M8-40-NI
EAN
4045525975231
Aantal
1 stuk
Zylinderschrauben GN 912.3 haben im Vergleich zu Zylinderschrauben ISO 4762 einen reduzierten Kopfdurchmesser. Dadurch können die Schrauben an Stellen versenkt werden, an denen...Meer tonen
Countersunk washers GN 184.5 are retained to the face of the shaft end with a countersunk head screw DIN ISO 2009 or DIN 7991 forming a clean-look end cap. A typical application...Meer tonen
The affixed damping washer of the split shaft collars GN 7072.3 absorbs mild shocks and has a sound-damping effect when the shaft collars come into contact with other...Meer tonen
Damping washers GN 7062.30 are designed as accessories for semi-split shaft collars and are attached with the help of an adhesive film, preferably on the groove-less side of the...Meer tonen
Guide Pots, Stainless Steel , for Serrated Locking Plates GN 187.4