Torque spanner

· Can be calibrated · Long service life / high accuracy · Option of:· Removal · Repair (if necessary) · Installation · Adjustment · Calibration · Note: adjustment, possible repairs with removal/installation of the KV torque wrench only in the HAZET Service Center · Suitable for control of inspection and test equipment · Sustainable and environmentally sound · Safety:· Haptic (close-gap release) · Audible (“click” sound) · Right/left release by plug-in square, - thereby tightening at torque setting, both to the right and to the left within the specified accuracy · Low weight for good handling and fatigue-free work. - Product design features · Slim design in strict accordance with the required insulating properties (material strength/overlaps) · Smooth transitions on switching and moving parts with ergonomic handle design and calibration notch · Uniform look even when using other components (e.g. red insulated sockets) · Attractive colour design of the housing and head with signal colours red/yellow · Handle in black to make a distinction with the colour and to prevent it from quickly appearing dirty · To prevent disturbing projecting parts (e.g. shift lever). ATTENTION: - Repairs may only be carried out by the HAZET Service Center, as repair works must be followed by a 10,000 V routine test in accordance with IEC 60900 · DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018 · Made in Germany · Output: 3/8 inch (10 mm) square, solid · Dimensions / length: 275 mm · VDE protective insulation up to 1000 V · For manual operation · Torque range min-max: 2–10 Nm · Accuracy: 6 % · Scale Graduation (Nm): 0.2 Nm · Actuating force min.-max. kg: 1.0–5.0 kg · Number of teeth: 24 (Opening angle 15°) · No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required.