A special feature of oil level indicators GN 650 is that the liquid level is visible even from the side. The polyamide body consists of two parts which are ultrasonically welded...show more
Oil sight glasses GN 541 have very high mechanical strength. This allows them to be relatively thin while offering a large viewing window. These oil sight glasses can also be...show more
This oil sight glasses GN 545.2 do not require a thread. The obliquely placed ribs and the elasticity of the plastic ensure that the oil level sight glass fits firmly into the...show more
Item-no.
1485943
Supplier number
742.5-22-M16X1,5-A-1
EAN
4045525747357
Quantity
1 Piece
Threaded plugs GN 742.5 can be used in particularly aggressive environments thanks to the material used. The seal is embedded in a radial recess and thus cannot be lost,...show more
Function and operational criteria of breather caps GN 663, see description of function. Breather caps can be connected by either a threaded or a bayonet (BA) fitting and filler...show more
Threaded Plugs, Plastic
Threaded plugs DIN 906 are used to close bore holes with cylindrical internal thread. The tightness depends on the medium, pressure, temperature and material pairing. The design...show more
Two-way breathable membranes GN 7404 are used when constructing housings and equipment. When installed in the wall of a housing, they can be used to equalize the pressure...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Oil sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil color or oil viscosity. The advantage of this...show more
Pin Keys, for Installation of Oil Sight Glasses GN 537
ATEX-Sight glasses GN 541.6 are suitable for use in an explosion risk environment. They comply with the guidelines 2014/34/EU. A detailed operating instruction is available and...show more
ATEX-Sight glasses GN 543.6 are suitable for use in an explosion risk environment. They comply with the guidelines (ATEX) 2014/34/EU. A detailed operating instruction is...show more
Breather caps GN 552.1 with sealing disk vents the tank after a lower pressure of 10 or 100 mbar respectively is reached. The sealing disk prevents the contamination of the oil...show more
ATEX-Breather caps GN 552.6 are suitable for use in an explosion risk environment. They comply with the guidelines (ATEX) 2014/34/EU. MAX-MIN markings can easily be marked on...show more
Connector pieces GN 880.1 are required when using oil drain valves GN 880. Screwing on the connector piece will activate the valve plate of the oil drain valve, allowing the oil...show more
Threaded plugs GN 740 are generally supplied as drain plugs in red color.
Threaded plugs GN 741 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....show more
Threaded plugs GN 742 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....show more
Mounting nuts GN 7430 are used, for example, to fasten breather elements, oil level sight glasses or threaded plugs when the wall is too thin for inserting a thread or this is...show more