Ball valve standard type, full passage, IT/IT, nickel-plated brass, Operating temp. -15 °C to 90 °C, G 1, DN 25, PN max. 40 bar. Applications: Compressed air, water, non-toxic...Meer tonen
Cross push-on connectors, for hose I.D. 13 mm, brass CW617N, Max. working pressure 10 bar, Max. medium/ambient temp. 90 °C.
Cross-connection supports, for hose I.D. 12 mm, working pressure max. 10 bar, temperature range -40 to 80 °C, POM. Lightweight tube connectors distinguished by high strength,...Meer tonen
Polyethylene hose (LD-PE), Temperature -10 °C to 60 °C, Hose Ø 12x9 mm, PN at 20 °C max. 9 bar, yellow, Roll of 25 mLow-priced, calibrated hose for use with screw fittings. With...Meer tonen
Art.-Nr.
1241499
Leveranciersnummer
M 500
EAN
4047322211512
Aantal
1 stuk
Brass ball valve, Pneumat. actuation drive, NAMUR, double-acting, Operating temp. -20°C to 150°C, Rp 1 1/2, DN 40, PN max. 16 bar. Ball valves with pneumatic actuator....Meer tonen
Mini ball valve, Rotating handle, nickel-plated brass, Medium/ambient temperature -10 °C to 80 °C, G/R 1/2 IT/ET, PN max 10 bar.
Art.-Nr.
1121402
Leveranciersnummer
SBS-11
EAN
4047322402156
VPE (Zak)
10 stuk
Aantal
1 stuk
Art.-Nr.
1121403
Leveranciersnummer
SBS-12
VPE (Zak)
10 stuk
Aantal
1 stuk
Art.-Nr.
1121407
Leveranciersnummer
SBS-16
EAN
4047322402200
VPE (Zak)
10 stuk
Aantal
1 stuk
Art.-Nr.
1117126
Leveranciersnummer
H 850
EAN
4047322190428
Aantal
1 stuk
Art.-Nr.
1117122
Leveranciersnummer
ZW 05
EAN
4047322175326
Aantal
1 Instellen
=
1 stuk
Double threaded nipple, Conical, R 1 1/2 a., R 1 1/2 a., AF 50, Brass, Max. working pressure 25 bar, Max. operating temp. 150 °C.
Service unit 2-part »multifix«, PC container, Protective cage, Size 1, G 1/4, Input pressure max. 16 bar, Control range 0.5-10 bar. Two-piece service units consisting of a...Meer tonen
Service unit 2-part »multifix-mini« with PC container, Size 0, G 1/4, Input pressure max. 12 bar, Control range 0.5 - 10 bar. Two-piece service units consisting of a diaphragm...Meer tonen
Art.-Nr.
1239731
Leveranciersnummer
EV 2
EAN
4047322211093
Aantal
1 stuk
Art.-Nr.
1239732
Leveranciersnummer
EV 3
EAN
4047322211260
Aantal
1 stuk
Screw-on hose connector G 1 1/2 i., for hose I.D. 32 nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150°C. Suitable for air, water, oil, steam, etc.
Soft PVC workshop hose set, Safety coupling, Temperature max. 60 °C, Hose Ø 11x6.3, PN at 20 °C max. 12 bar, Length 10 m. Highly flexible hose for compressed air applications in...Meer tonen
Pipe double nipple, G 1 1/2, Length 100 mm, Working pressure max. 10 bar, Medium / ambient temperature max. 90 °C, Bright brass.
Air gun with short nozzle, Plastic, Temperature range -20 °C to 50 °C, PN max. 10 bar, G 1/4 IT. For blowing out and cleaning machines, engines, bearings, sliding surfaces,...Meer tonen
Blow gun, Plastic, with extension tube 105 mm, G 1/4 female, Operating temperature -20 °C to 45 °C, PN max. 10 bar. For blowing out and cleaning machines, engines, bearings,...Meer tonen
Sealing ring made of polyamide, Temperature max. 85 °C, for thread G 1, PU 100 pcs..
Polyamide hose (PA 12 PHL), Temperature -40 °C to 80 °C, Hose Ø 14x12, PN at 20 °C max. 10 bar, green, Roll of 25 mPA 12 has a low water absorptive capacity and is therefore...Meer tonen