Indexing mechanisms GN 200 replace and simplify complicated indexing mechanisms, such as indenting levers, latching mechanisms, indexing pins and other securing elements....Meer tonen
Lockable latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the...Meer tonen
The lockable latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the locking ease the closing of the door....Meer tonen
Stainless steel indexing plungers GN 617 are designed such that the plunger set in the end position (pressure spring is "on block") can also absorb axial forces. For...Meer tonen
Indexing plungers GN 717 are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning...Meer tonen
Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert...Meer tonen
Adjustable hand levers GN 302.2 have a straight lever, not inclined, being parallel to the clamping space. Adjustable hand levers are ideal whenever parts have to be clamped in...Meer tonen
Leveling feet GN 45 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...Meer tonen
Toggle clamps GN 810.3 are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations, and in the open position,...Meer tonen
Toggle clamps GN 812 work according to the toggle principle: lever and clamping bar move in the same direction. They can be mounted in two planes via the dual flanged mounting...Meer tonen
Toggle clamps GN 810.3 are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations, and in the open position,...Meer tonen
Stainless Steel Finger Handles
Wing nuts GN 434 clamp and fasten parts easily without tools. The ergonomic shape and the projecting collar make operation easier. The version in stainless steel A4 can be used...Meer tonen
Stainless Steel Wing Nuts
Art.-Nr.
1483327
Leveranciersnummer
633-40-M5-16-DGR
EAN
4045525642744
Aantal
1 stuk
Machine feet GN 36 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines. Foot plates and threaded...Meer tonen
The clamping bores of base plate connector clamps GN 163.5 are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw...Meer tonen
The clamping bore of base plate connector clamps GN 165 is not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. The versions with square...Meer tonen
Base plate mounting clamps GN 473 have a horizontal and a vertical clamping bore. The vertical clamping bore is additionally fitted with a square. The bore distance m...Meer tonen
Fork joints GN 751.1 basically correspond to the fork head of DIN 71752 (Type A), but, unlike the DIN element, they have a rotating shaft and an additional pin with axial shaft...Meer tonen
Art.-Nr.
1213163
Leveranciersnummer
751-16-32-M16F-B
EAN
4045525372092
Aantal
1 stuk
Fork joints GN 751 consists of a fork head according to DIN 71752 and a pin with one safety circlip DIN 471 (typeA). Standard DIN 71752 does not foresee size d1 = 20.