Art.-Nr.
1020863
EAN
4045525595033
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1020844
EAN
4045525594029
VPE (Verpakking)
10 stuk
Aantal
1 stuk
The official DIN standard sheet specifies additional sizes 40 - M5 / B5.
Art.-Nr.
1077091
Leveranciersnummer
71802-13-M8-CS
Aantal
1 stuk
On the official DIN standard sheet you can find the additional sizes 10 and 13.
The sealing rings listed in this standard sheet are only an extract of DIN 7603. They are used in connection with threaded plugs DIN 908.
Spherical washers and dished washers DIN 6319 are used for clamping on non-parallel surfaces. The dished washers type G with enlarged outside diameter are mainly used on...Meer tonen
Art.-Nr.
1020846
EAN
4045525594104
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1020852
EAN
4045525594241
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...Meer tonen
The handle tube of the cabinet U-handles GN 667 can be mounted without any further machining, allowing special lengths to be realised easily. For handles with longer spans or...Meer tonen
Knurled screws DIN 464 are turned entirely from a single piece. The thread of the screw generally extends up to the shoulder and ends in a runout without recess. They are...Meer tonen
Cabinet U-handles GN 425.3 are made of bent stainless steel sections and are affixed by welding. The holes d2 serve, if necessary, for inserting dowel pins or guide pins that...Meer tonen
Art.-Nr.
1170106
Leveranciersnummer
351-30-15-M8-ES-55
EAN
4045525596030
Aantal
1 stuk
The dimensions of the threaded plugs GN 749 largely comply with DIN 908, and the outer diameter d2 is adapted to the threaded holes of pipe fittings as per DIN 3852. In...Meer tonen
Toggle latches GN 831 are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof. The...Meer tonen
Threaded shaft collars GN 706.3 correspond in outer dimensions to the semi-split shaft collars GN 706.2. The bore has, however, an internal thread so that the clamping ring can...Meer tonen
Star knobs GN 6336.2 with bushing have important advantages: The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding...Meer tonen
Size d1= 12 is supplied with a fine thrad M12x1,5 according to DIN. In practice, however, M12 x1,25 is preferred. DIN 71752 does not foresee size d1= 20.
Art.-Nr.
1201290
Leveranciersnummer
352-50-30-M10-S-55
EAN
4045525597303
Aantal
1 stuk
Retaining magnets GN 52.3, are combined with the zinc-plated or red-painted steel housing and insulation of brass/aluminum into a system that shields and strengthens the magnet...Meer tonen
Art.-Nr.
1020859
EAN
4045525594395
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1020865
EAN
4045525595095
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1020866
EAN
4045525595132
VPE (Verpakking)
10 stuk
Aantal
1 stuk