Horizontally elongated heavy duty hinges GN 237.3 are designed for use under tough conditions. Attachment points with a wider spacing and more installation holes allow a more...Meer tonen
Art.-Nr.
1201295
Leveranciersnummer
352-50-40-M10-S-40
EAN
4045525609372
Aantal
1 stuk
The original ELESA design with 5 recess grips is typical for star knobs with threaded stud GN 5334.4. This form gives these grips an appealing look and additionally allows a...Meer tonen
Star knobs GN 6336.1 with bushing have important advantages: The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding...Meer tonen
Edge protection seal profiles GN 2180 can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded...Meer tonen
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
Tube end plugs GN 991 have been designed for sealing tube ends for safety or optical reasons. They are pressed into the tube end either by hand or with a mallet.
Joints pieces GN 752 are designed to be used in combination with fork heads DIN 71752 respectively fork joints GN 751.
Star knobs GN 6335.5 comply with DIN 6335 type L.
The stroke of the square U-bolts of stainless steel latch type toggle clamps GN 851 can be adjusted within its range. In the clamped position the square U-bolt is parallel to...Meer tonen
Toggle latches GN 832.2are used for the secure holding of flaps, container lids, machine coverings and similar applications. The clamping stroke exceeds the dead centre point...Meer tonen
Art.-Nr.
1353719
Leveranciersnummer
839-50-M12-98
EAN
4045525385009
Aantal
1 stuk
Art.-Nr.
1484068
Leveranciersnummer
5337.2-25-M5-40
EAN
4045525669833
Aantal
1 stuk
The retaining magnets GN 51.3 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on...Meer tonen
The position of linear actuator connectors can be easily read from GN 711.2 rulers. The black background creates a high contrast to the natural-colored numbers and scales, and...Meer tonen
Going beyond the DIN standard, handwheels DIN 950 are also available with Ø d1 = 180 and in types F and D with fixed or revolving handle.
Shaft collars GN 705 essentially comply with the versions of DIN 705. GN 705 also contains a number of practical intermediate sizes in addition to the DIN-versions as well as...Meer tonen
Leveling feet GN 33 will be delivered mounted and are not removable.
The retaining magnets GN 51.4 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on...Meer tonen
Star knobs with threaded stud GN 5337.13 can be captively attached to a base element with the help of a ball chain. The star knobs with threaded stud are supplied ready...
Hinges GN 237 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.
Workholding bolts DIN 6321 are inserted into bores for positioning, assisted by the flattened design (type C) to compensate tolerances in the spacing of two bores. Another...Meer tonen
Hinges GN 128 are produced from drawn weldable profiled steel extrusions. Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel...Meer tonen
The rotary clamping latches GN 516.5 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen