Art.-Nr.
1350803
Leveranciersnummer
529-22-M6-20
EAN
4045525098442
VPE (Verpakking)
25 stuk
Aantal
1 stuk
The design and handling of the adjustable hand lever GN 604.2 satisfy the high standards of the Ergostyle® product family. Safety hand levers GN 604.2 are used where the...Meer tonen
For mounting clamps, the clamping kits GN 511 replace the socket cap screws with hexagonal socket DIN 912. It is used on all clamping points where repeated clamping actions are...Meer tonen
Toggle clamps GN 820 work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action. In the...Meer tonen
When ball knobs DIN 319 type L and M are used the shaft does not require a thread. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place,...Meer tonen
Precision type swing bolts DIN 444 are mainly used for jigs and fixtures. Produced in a precision version as is required in machine and jig construction, the stated tolerances...Meer tonen
The following guidelines of lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table: The eye bolt must be of fully screwed in to...Meer tonen
Blechscharniere GN 136 sind in vielen unterschiedlichen Ausführungen erhältlich und eignen sich für leichte bis mittelschwere Anwendungen. Die Form A lässt sich außer durch...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...Meer tonen
Stainless steel ball catches GN 4490 are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. The stainless steel version is...Meer tonen
Magnetic plugs GN 738.5 attract iron particles which might be floating in the fluid. The stainless steel makes them suitable for use in particularly aggressive environments. To...Meer tonen
Stainless steel latch type toggle clamps GN 851.3 are compact in design and can be used to ensure high holding capacities. When closing the spanner, a safety hook positively...Meer tonen
Rubber buffers GN 356 provide elastic support for equipment such as compressors and pumps. The tapered shape absorbs side forces better compared with cylindrical rubber buffers....Meer tonen
Stainless steel hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low...Meer tonen
With stainless steel hinges GN 127 doors and covers can be positioned snugly and in a finely adjusted manner by moving the adjusting bushings. In this way, door gaps can be...Meer tonen
Art.-Nr.
1476819
Leveranciersnummer
237.3-NI-80-80-B-GS
EAN
4045525538672
Aantal
1 stuk
The static load of the leveling feet GN GN 343.6 is limited by the load capacity of the ball joint / threaded stud (AISI 303). The static load values in the above table refer to...Meer tonen
The stroke of the square U-bolts of latch type toggle clamps GN 851 can be adjusted within its range. In the clamped position the square U-bolt is parallel to the fixing plane...Meer tonen
Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping....Meer tonen
Leveling feet GN 31 with vulcanised rubber (Types B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to...Meer tonen
Leveling feet GN 40 can be used in a host of combinations of base plates and adjustable spindle versions. The base plate with the rubber underlay protects sensitive surfaces and...Meer tonen
Star Knobs, Stainless Steel
Stainless steel star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii...Meer tonen
Star knobs GN 6336.2 with all stainless steel bushing (main dimensions of DIN 6336) have important advantages: The face of the bushing is exactly square to the bore and is with...Meer tonen