Art.-Nr.
1722417
Leveranciersnummer
7603-CU-5-7,5-A
EAN
4045525965683
VPE (Verpakking)
10 stuk
Aantal
10 stuk
Art.-Nr.
1722416
Leveranciersnummer
7603-CU-6,5-9,5-A
EAN
4045525966055
VPE (Verpakking)
10 stuk
Aantal
10 stuk
Dust caps GN 710 prevent the entering of dirt into angled ball joints DIN 71802.
Art.-Nr.
1211545
Leveranciersnummer
710-13,5
EAN
4045525357037
Aantal
1 stuk
Spacer disks and foot disks GN 438 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398819
Leveranciersnummer
438-32-9-5-B-70
EAN
4045525434400
Aantal
1 stuk
Art.-Nr.
1398827
Leveranciersnummer
438-50-11-6-B-70
EAN
4045525434486
Aantal
1 stuk
Spacer disks and foot disks GN 438.5 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398845
Leveranciersnummer
438.5-32-9-5-A-70
EAN
4045525434660
Aantal
1 stuk
Art.-Nr.
1398861
Leveranciersnummer
438.5-64-26-6-A-70
EAN
4045525434820
Aantal
1 stuk
Art.-Nr.
1398863
Leveranciersnummer
438.5-64-5-6-A-70
EAN
4045525434844
Aantal
1 stuk
By combining the spacers GN 450.1 also the distances h = 20, 25 and 30 mm can be realized.
Spacers GN 6226 are certified according to EHEDG and DGUV Test guidelines and are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead...Meer tonen
The distance bushings GN 628.2 are accessories for cabinet U-handles GN 628, GN 628.1, GN 628.3 and GN 628.4
Tolerances of chamfers, different sheet metal thicknesses or the use of seals could mean that the mounting surfaces of the hinges on the frame and door do not have the desired...Meer tonen
With this adjustable knob GN 700 a shaft can be infinitely adjusted in both directions. The anti-backlash mechanism with a max. load of 15 Nm ensures the firm locking of the...Meer tonen
With side clamps GN 9190.1, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen
With side clamps GN 9190.2, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen
With side clamps GN 9190, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against...Meer tonen
Threaded plugs GN 740 are generally supplied as drain plugs in red color.
Threaded plugs GN 741 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Threaded plugs GN 742 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Art.-Nr.
1478581
Leveranciersnummer
322-250-B26-R
EAN
4045525483484
Aantal
1 stuk
Oil sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil color or oil viscosity. The advantage of this...Meer tonen