Disk handwheels DIN 3670 have recessed grips at their back. As a rule they are supplied without handle, but the mounting of a handle is possible. The handwheel diameter d1=80...Meer tonen
Disk handwheels GN 323 have recessed grips at their back.
Handwheels GN 9234 are intended for use with linear actuators and are designed as disk or spoked handwheels, depending on their size. The applied torque is transmitted by means...Meer tonen
The official DIN standard sheet specifies additional sizes 200 - M24 / B24.
Cabinet U-handles GN 425.1 are manufactured from a bent stainless steel profile. Cabinet U-handles with Ø d1 = 8 and 10 are delivered with two location disks to ensure proper...Meer tonen
The folding handles with recessed tray GN 425.8 are used if the handle is to protrude by a maximum of 3 mm when folded down. In type A, the folding handle is held in both end...Meer tonen
Handwheels GN 522.8 are similar to spoked handwheels GN 522. They are, however, fitted with a housing to accept position indicators GN 000.8 and GN 000.3 and they are provided...Meer tonen
Adjustable hand levers GN 604 like all the products of the Ergostyle® family are renowned for their good style but also their ergonomical shape. Pulling the lever disengages the...Meer tonen
Adjustable hand levers GN 302 have a straight lever, not inclined, being parallel to the clamping space. Adjustable hand levers are ideal whenever parts have to be clamped in a...Meer tonen
Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash. The graduations on the...Meer tonen
Adjusting screws GN 827 are used in combination with bearing blocks GN 828 for simple adjustment and positioning tasks. For processing and assembly equipment on which...Meer tonen
Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread. The movable thrust pad is easily clipped on and taken off. The thrust pads...
Art.-Nr.
1342938
Leveranciersnummer
6336.4-TE-40-M8-40
EAN
4045525183971
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Art.-Nr.
1209783
Leveranciersnummer
6336.5-ES-40-M8-20
EAN
4045525884489
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Star Knobs, Stainless Steel
The star knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.
The design of the star knobs GN 636.4 matches the product family Ergostyle®.
The original ELESA design with 5 recess grips is typical for star knobs GN 5334. This form gives these grips an appealing look and additionally allows a high torque to be...Meer tonen
Stainless steel star knobs GN 5335.4 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner...Meer tonen
Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface. Original ELESA design, now produced in...
Characteristic of the star knobs GN 5337.2 is the 5 lobes. They not only give the knobs a specific style but this shape has also enabled the operator to achieve a higher torque.
Star knobs GN 5435 are intended for use in hygienic areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish and the large corner radii...Meer tonen
Star Knobs, Aluminum
Characteristic of the star knobs GN 5337.4 is the 5 lobes. They not only give the knobs a specific style but this shape has also enabled the operator to achieve a higher torque....Meer tonen