When using the cylindrical knobs GN 519, make sure that the threaded pin is not too short. Otherwise the plastic element may break under excessive stress exposure.
The cylindrical knobs GN 519.1 do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end...Meer tonen
Cylindrical handles GN 519.2 are made of blue plastic granulate that is FDA compliant as per FDA CFR.21 and EU 10/2011 as well as visually detectable or metal detectable. The...Meer tonen
Steel revolving handles GN 598 are mainly used on safety handwheels to increase imbalance and thus avoid free wheeling.
The outstanding feature of revolving handles GN 598.2 is their highly robust design. Type E is suitable for use in connection with user-specific threaded bolts.
Typical in design are the revolving handles GN 798.2 with their stepped shape consisting of two cylinders giving the operator a better grip.
Typical in design are the retractable handles GN 798.3 with their stepped shape consisting of two cylinders giving the operator a better grip, especially when pulling the handle...Meer tonen
Typical in design are the retractable handles GN 798.5 with their stepped shape consisting of two cylinders giving the operator a better grip, especially when pulling the handle...Meer tonen
Art.-Nr.
1350910
Leveranciersnummer
5342-25-M5-10
EAN
4045525388697
Aantal
1 stuk
Art.-Nr.
1350916
Leveranciersnummer
5342-32-M6-30
EAN
4045525388758
Aantal
1 stuk
Fixed conical handles GN 203 are suitable for applications where the handle is exposed to low loads. For applications with increased loads we recommend to use cylindrical...
Mushroom shaped knobs GN 75.5 have a compact and timeless design. Their non-scooping geometry combats dirt build-up and makes cleaning easier. Mushroom shaped knobs GN 75.5 can...Meer tonen
On the official DIN standard sheet you can find the additional sizes 10 and 13. For reasons of hygiene, no internal hexagon is used in type A4.
Ball knobs DIN 319 made of steel and aluminum are not on the official DIN standard sheet.
Art.-Nr.
1196279
Leveranciersnummer
319-KT-25-M6-E-RT
EAN
4045525656451
Aantal
1 stuk
Ball knobs DIN 319 are not on the official DIN standard sheet.
Art.-Nr.
1466405
Leveranciersnummer
DIN 319-KT-32-M10-E
EAN
4045525235359
Aantal
1 stuk
Ball Knobs, Plastic with Brass Insert
When ball knobs DIN 319 type L and M are used the shaft does not require a thread. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place,...Meer tonen
The ball knobs GN 319.1 do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end should be...Meer tonen
Art.-Nr.
1075621
Leveranciersnummer
DIN 319-KT-32-M8-C
EAN
4045525172678
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Art.-Nr.
1196291
Leveranciersnummer
DIN 319-KU-12-M4-C
EAN
4045525172715
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Art.-Nr.
1196306
Leveranciersnummer
DIN 319-KU-32-M10-C
EAN
4045525173491
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Art.-Nr.
1075627
Leveranciersnummer
DIN 319-KU-32-M8-C
EAN
4045525173569
VPE (VE NW)
25 stuk
Aantal
1 stuk