The non-wearing friction ring ensures perfect engagement of the scale ring when re-aligning the spindle. In addition it allows the setting of the scale ring on a static shaft....Meer tonen
The non-wearing friction ring ensures perfect engagement of the scale ring when re-aligning the spindle. In addition it allows the setting of the scale ring on a static shaft....Meer tonen
Scale rings GN 526.1 are supplied separately i.e. not mounted, together with 3 suitable rivets. Besides the standard scale (Type S) these scale rings can be supplied with any...Meer tonen
Control knobs GN 729 are usually selected for applications which require a limited movement within 180°. With the aid of limiting pins which protrude into the circular groove...Meer tonen
Wipers GN 2428 protect against dirt deposits on rails and rollers. For size h1 = 18 the wiper is attached with only one central screw. Screws are included parts of the order.
Cam roller linear guide rails GN 2422 can be combined with cam roller carriages GN 2424 or cam rollers GN 2426 to construct linear guide rail systems. These space-saving units...Meer tonen
Open-End Wrenches
Telescopic linear slides GN 2404 are used, for example, for storage drawers and sliding doors, or in jigmaking for a sliding motion in a linear direction. If the support screw...Meer tonen
Telescopic linear slides GN 2406 consist of two slides linked by an intermediate profile. They are used when the lateral space requires a small width, and when large extension...Meer tonen
Telescopic linear slides GN 2408 consist of two interconnected linear slides. They are used, for example, in handling or automation applications and in jigmaking, for...Meer tonen
Telescopic linear slides GN 2410 consist of two linear motion ball slide rails connected at the runners. They are used, for example, in material handling or automation...Meer tonen
Art.-Nr.
1214420
Leveranciersnummer
900.3-30-30-S
EAN
4045525511835
Aantal
1 Instellen
=
1 stuk
Indexing mechanisms GN 200 replace and simplify complicated indexing mechanisms, such as indenting levers, latching mechanisms, indexing pins and other securing elements....Meer tonen
Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms. Besides the standard scale (Type AS) the control knob version may be supplied with...Meer tonen
With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand...Meer tonen
Art.-Nr.
1214447
Leveranciersnummer
900-120-185-25-HN-2
EAN
4045525533165
Aantal
1 stuk
Art.-Nr.
1214484
Leveranciersnummer
900-120-260-100-H-1
EAN
4045525508958
Aantal
1 stuk
Art.-Nr.
1214579
Leveranciersnummer
900-80-170-50-HR-2
EAN
4045525533592
Aantal
1 stuk
Art.-Nr.
1214591
Leveranciersnummer
900-80-195-75-HN-2
EAN
4045525533363
Aantal
1 stuk
Art.-Nr.
1224254
Leveranciersnummer
646.4-270
EAN
4045525999534
VPE (Verpakking)
4 stuk
Aantal
1 stuk
Art.-Nr.
1723320
Leveranciersnummer
103-8X1,5-500-LH-ST
EAN
4045525954946
Aantal
1 stuk
Also this scale rings GN 264 can be supplied with any type of graduation. Regarding design, numbering run, numbering position and numbering sequence of the scale please see the...Meer tonen
Art.-Nr.
1341240
Leveranciersnummer
5343-70-B10-0003.0-L
EAN
4045525828728
Aantal
1 stuk
Art.-Nr.
1341241
Leveranciersnummer
5343-70-B10-0003.0-R
EAN
4045525828735
Aantal
1 stuk