The clamping bore of base plate connector clamps GN 165 is not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. The versions with square...Meer tonen
Base plate mounting clamps GN 473 have a horizontal and a vertical clamping bore. The vertical clamping bore is additionally fitted with a square. The bore distance m...Meer tonen
Fork joints GN 751.1 basically correspond to the fork head of DIN 71752 (Type A), but, unlike the DIN element, they have a rotating shaft and an additional pin with axial shaft...Meer tonen
Art.-Nr.
1213163
Leveranciersnummer
751-16-32-M16F-B
EAN
4045525372092
Aantal
1 stuk
Fork joints GN 751 consists of a fork head according to DIN 71752 and a pin with one safety circlip DIN 471 (typeA). Standard DIN 71752 does not foresee size d1 = 20.
The clamping bore axes of the two-way connector clamps GN 132.9 are arranged at an angle of 90° to each other. They hold typical construction tubes with full surface contact...Meer tonen
Angle pieces and shackles GN 967 are preferably used in connection with profile systems. Square connections or connections with same contact area can so be realised in the...Meer tonen
Transfer units GN 391 are normally used in connection with linear actuators. They are designed to transfer the rotary movement for operating the linear actuators to another or a...Meer tonen
The clamping bores of flanged two-way connector clamps GN 141 are not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. The versions with...Meer tonen
Swivel clamp connector bases GN 271 can be combined with swivel clamp connectors GN 273, GN 275 or GN 277 to swivel clamp connector joints. Swivel clamp connector bases GN 271...
Art.-Nr.
1393170
Leveranciersnummer
271-25-NI
EAN
4045525481374
Aantal
1 stuk
Swivel clamp connector bases GN 272 can be combined with swivel clamp connectors GN 274, GN 276 or GN 278 to swivel clamp connector joints.
The fixing lug of the swivel clamp connector bases GN 272.9 is available with a smooth surface or with external serration. The flange with two or four bores serves for fastening...Meer tonen
The clamping bore of swivel clamp connectors GN 273 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 273 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 274 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 275 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 275 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The fixing lug of the swivel clamp connectors GN 276.9 is available with a smooth surface or with external or internal serration. The clamping bore holds typical construction...Meer tonen
The clamping bore of swivel clamp connectors GN 277 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 277 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
The clamping bore of swivel clamp connectors GN 278 is mechanically machined and designed for GN 990 or DIN 2391, DIN 2395 and DIN 2462 construction tubes. At the screw location...Meer tonen