Joints pieces GN 752 are designed to be used in combination with fork heads DIN 71752 respectively fork joints GN 751.
Fork joints GN 751 consist of a fork head according DIN 71752 and a pin with axial shaft safety (Type KL and SL) or a snap-on spring pin (Type B). Size d1 = 12 is supplied with...Meer tonen
Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Stainless ateel angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the type with safety catch (Type CSN) is...Meer tonen
Art.-Nr.
1213163
Leveranciersnummer
751-16-32-M16F-B
EAN
4045525372092
Aantal
1 stuk
Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
The clamping nut of the ball joints GN 782 can be set to give a required thrust on the Belleville spring washers in order to increase the resistance to the ball movement. At the...Meer tonen
The permissible r.p.m. of universal joints with friction bearing DIN 808 is to a large extent dependent on the type of application such as load, duration, angular disposition as...Meer tonen
Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones...Meer tonen
Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Art.-Nr.
1218408
Leveranciersnummer
DIN 908-ST-G1-AC
EAN
4045525899599
Aantal
1 stuk
Art.-Nr.
1218400
Leveranciersnummer
DIN 908-ST-G1/4-AC
EAN
4045525899551
Aantal
1 stuk
Art.-Nr.
1218403
Leveranciersnummer
DIN 908-ST-G11/2-AA
EAN
4045525899841
Aantal
1 stuk
Art.-Nr.
1218413
Leveranciersnummer
DIN 908-ST-M10X1-AC
EAN
4045525899407
Aantal
1 stuk
Art.-Nr.
1218418
Leveranciersnummer
908-ST-M16X1,5-AA
EAN
4045525899667
Aantal
1 stuk
Art.-Nr.
1224715
Leveranciersnummer
DIN 908-ST-M42X2-A
EAN
4045525898950
Aantal
1 stuk
DIN 71752 does not foresee size d1= 20.
Fork joints GN 751.1 basically correspond to the fork head of DIN 71752 (Type A), but, unlike the DIN element, they have a rotating shaft and an additional pin with axial shaft...Meer tonen
Fork joints GN 751 consists of a fork head according to DIN 71752 and a pin with one safety circlip DIN 471 (typeA). Standard DIN 71752 does not foresee size d1 = 20.
Dust caps GN 710 prevent the entering of dirt into angled ball joints DIN 71802.
Art.-Nr.
1211545
Leveranciersnummer
710-13,5
EAN
4045525357037
Aantal
1 stuk
Gaiters GN 808.1 give universal joints full protection against ingress of dirt. At the same time they can be filled with grease which gives long term lubrication for uiniversal...Meer tonen