Adapter flanges GN 875.4 are designed as accessories to swing clamps GN 875 / GN 876 and serve as adapter for mounting custom clamping arms. The angle orientation of the...Meer tonen
Spacer disks and foot disks GN 438 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398870
Leveranciersnummer
438-19-7-4-B-70
EAN
4045525435155
Aantal
1 stuk
Art.-Nr.
1398819
Leveranciersnummer
438-32-9-5-B-70
EAN
4045525434400
Aantal
1 stuk
Art.-Nr.
1398827
Leveranciersnummer
438-50-11-6-B-70
EAN
4045525434486
Aantal
1 stuk
Spacer disks and foot disks GN 438.5 provide a damping and muffling function and protect surfaces from damage. By stacking several spacer disks on each other, the spring rate of...Meer tonen
Art.-Nr.
1398845
Leveranciersnummer
438.5-32-9-5-A-70
EAN
4045525434660
Aantal
1 stuk
Art.-Nr.
1398863
Leveranciersnummer
438.5-64-5-6-A-70
EAN
4045525434844
Aantal
1 stuk
Spacers GN 6226 are certified according to EHEDG and DGUV Test guidelines and are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead...Meer tonen
Tolerances of chamfers, different sheet metal thicknesses or the use of seals could mean that the mounting surfaces of the hinges on the frame and door do not have the desired...Meer tonen
With side clamps GN 9190.1, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen
With side clamps GN 9190.2, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it...Meer tonen
With side clamps GN 9190, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against...Meer tonen
Threaded plugs GN 740 are generally supplied as drain plugs in red color.
Threaded plugs GN 741 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Threaded plugs GN 742 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Oil sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil color or oil viscosity. The advantage of this...Meer tonen
Anschlagpunkte GN 589.5 sind zum Einhängen von Anschlagmitteln und Zurrmitteln bestimmt und zeichnen sich durch ihre besonders niedrige Bauform aus. Sie werden z. B. an...Meer tonen
The static load of the leveling feet GN 343.1 is limited by the load capacity of the ball joint (property class 5.8). The static load values in the table refer to a net vertical...Meer tonen
Leveling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw. For this reason they offer the advantage of reduced...Meer tonen
ATEX-Sight glasses GN 541.6 are suitable for use in an explosion risk environment. They comply with the guidelines 2014/34/EU. A detailed operating instruction is available and...Meer tonen
ATEX-Sight glasses GN 543.6 are suitable for use in an explosion risk environment. They comply with the guidelines (ATEX) 2014/34/EU. A detailed operating instruction is...Meer tonen
Base plates GN 810.19 are accessory for knee lever modules GN 810.12 / GN 810.13.
Two-way breathable membranes GN 7404 are used when constructing housings and equipment. When installed in the wall of a housing, they can be used to equalize the pressure...Meer tonen