Retaining cables GN 111.2 are available in 5 different types and can therefore be used in a wide range of applications, e.g. for loss protection or as connecting and mounting...Meer tonen
With spring latches GN 722.3, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to...Meer tonen
With spring latches GN 722.3, the plunger pin is retracted over the curve of the guide by a 180° turn of the latch. The notch at the upper end of the curve causes the latch to...Meer tonen
Rastbolzen GN 724.6 verfügen über einen Raststift mit quadratischem Querschnitt und einer Rastfläche, der eine Anlaufschräge gegenüber liegt. Bei einer Bewegung in Richtung der...Meer tonen
Stainless steel indexing plungers GN 617 are designed such that the plunger set in the end position (pressure spring is "on block") can also absorb axial forces. For...Meer tonen
Stainless steel indexing plungers GN 717 are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and...Meer tonen
Indexing plungers GN 717 are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning...Meer tonen
Spring loaded side thrust pins GN 715 are versatile and practical elements for holding, positioning and clamping of workpieces. They eliminate costly alternatives, are space...Meer tonen
Art.-Nr.
1723567
Leveranciersnummer
111.2-150-K-TR-50
Aantal
1 stuk
Haltestücke GN 3492 befestigen Normteile mit Außengewinde wie z. B. Druckstücke oder Anschlagschrauben schnell und einfach rechtwinklig zur Befestigungsebene. Über die...Meer tonen
Mounting blocks GN 412.1 are reasonably priced fitting aid for indexing plungers, cam action indexing plungers and for setting bolts and buffers. To position the indexing pin of...Meer tonen
Stainless steel mounting blocks GN 612.1 simplify the mounting of indexing plungers (e.g. GN 817) as well as cam action indexing plungers GN 612, GN 712 and GN 712.1. To...Meer tonen
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...Meer tonen
Art.-Nr.
1213947
Leveranciersnummer
817-6-6-CK-RT
EAN
4045525613911
Aantal
1 stuk
Locking plungers GN 514 feature a cardioid curve mechanism based on the principle of a retractable pen. They offer very ergonomic operation that requires only repeated pressing...Meer tonen
Art.-Nr.
1208137
Leveranciersnummer
612-5-M10-AK
EAN
4045525591707
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Art.-Nr.
1208141
Leveranciersnummer
612-5-M10X1-AK
EAN
4045525591738
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Art.-Nr.
1208227
Leveranciersnummer
612-8-M20-AK
EAN
4045525591226
Aantal
1 stuk
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself....Meer tonen
Indexing plungers GN 617.2 with plastic body are a reasonably priced indexing plunger variant. The dimensions correspond to those of the GN 617 or GN 617.1 indexing plungers....Meer tonen
Stainless steel indexing plungers GN 7017 are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to...Meer tonen
Stainless steel indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob. Type C / CK are used for such applications where the plunger has to stay in...Meer tonen






















