Owing to its shape, the lifting ring of the indexing plungers GN 413 can be used both as a screw-in assist during assembly or as indexing lock (Type C / Type CK). Indexing...Meer tonen
Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings. The lug d2 is intended for positioning. The plastic knob with the...Meer tonen
Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself....Meer tonen
Stainless steel cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin...Meer tonen
Indexing plungers GN 608 are distinguished for their small dimensions.
Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...Meer tonen
Stainless steel indexing plungers GN 608.5 are distinguished for their small dimensions.
Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...Meer tonen
Guide bushings GN 172.1 with conical bore will be used for the latch bore of indexing plungers GN 817.5.
Guide bushings GN 179.1 with conical bore will be used for the latch bore of indexing plungers GN 817.5.
Positioning bushings GN 412.2 are used in connection with bolts of indexing plungers and cam action indexing plungers. The threads are adapted to the mounting blocks GN 412.1...
Locking pins GN 124.1 are used for quickly fixing, connecting and locking various parts and workpieces made of magnetic materials. A neodymium magnet is recessed into the...Meer tonen
Locking pins with axial lock GN 214.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...Meer tonen
For cam action indexing plungers GN 721 the indexing plunger pin is withdrawn by turning the lock by 180°. When the cam action indexing plungers are positioned symmetrically,...Meer tonen
The groove on cam action indexing plungers GN 721.1 ensures that the locking pin remains in its withdrawn position. For opposing cam action indexing plungers the left or...Meer tonen
Stainless steel spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.
Druckstücke GN 631.2 werden zum Spannen und Andrücken verwendet, wenn Oberflächen vor Beschädigung geschützt werden sollen. Darüber hinaus wirken sie rutschhemmend, dämpfend und...Meer tonen
Side thrust pins GN 716 are designed for holding, positioning and locating a workpiece. They have to be pressed into the housing by at least the dimension l3, so as to ensure a...
Spring plungers GN 611 are used as ejectors, push-on and push-off operations in the sheet metal industry, as well as cushioners. The slot on the plunger side is provided for...Meer tonen
Spring plungers GN 614.2 are a result of a further development of spring plungers type GN 614 for special applications. A tolerance H8 is recommended for the locating bore of d1.
Spring plungers GN 614.3 are used for locking as well as for pressure and hold-off functions. A simple mounting hole is sufficient for mounting. The spring plungers are inserted...Meer tonen
Spring plungers GN 614.6 are primarily used in toolmaking as spring-loaded stops as well as for pressure and hold-off functions. Tolerance d1 H7 is recommended for the mounting...
Spring plungers GN 614.8 are used for locking as well as for pressure and hold-off functions. The ball is mounted in a plastic shell so as to be freely movable, which enables...Meer tonen
Stainless steel spring plungers GN 615.5 are used for locking as well as for pressure and hold-off functions. Due to the selection of materials, the stainless steel spring...Meer tonen