Art.-Nr.
1351453
Leveranciersnummer
616.1-M16-SN
EAN
4045525418929
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1208364
Leveranciersnummer
615.3-M10-KN-PFB
EAN
4045525483989
Aantal
1 stuk
Press-fit stainless steel spring plungers GN 614.7 are used as detents as well as for push-on and push-off applications and ejectors. The tolerance d1 H7 is recommended for the...
Art.-Nr.
1485981
Leveranciersnummer
614-4-NIL
EAN
4045525748422
Aantal
1 stuk
Art.-Nr.
1208374
Leveranciersnummer
615.3-M12-KSN-PFB
EAN
4045525484047
Aantal
1 stuk
Spring plungers GN 614.5 are used as detents as well as for push-on and push-off applications and ejectors. The geometric shape of the plastic housing generates a self-clamping...Meer tonen
Side thrust pins GN 614.1 are used for arresting and as press-on or press-off elements. The easy attachment using one or two countersunk screws also allows its use where a...Meer tonen
Art.-Nr.
1207888
Leveranciersnummer
607.9-SW14-SW16
EAN
4045525309067
Aantal
1 stuk
Eccentric bushings GN 715.2 allow side thrust pins GN 715 / GN 714 to be adjusted. These bushings allow the side thrust pin to be precisely adjusted to suit the requirements for...
Spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.
Federnde Druckstücke GN 615.10 werden zur Arretierung sowie für An- und Abdrückfunktionen verwendet. Die Kugel ist frei beweglich in eine Kunststoffschale gelagert, was ein...Meer tonen
Federnde Druckstücke GN 616.2 werden zur Arretierung sowie für An- und Abdrückfunktionen verwendet. Der Schlitz auf der Kugelseite dient zum Einschrauben in Sacklöcher. Hierzu...Meer tonen
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in...Meer tonen
Art.-Nr.
1211722
Leveranciersnummer
712-8-M16X1,5-AK
EAN
4045525496361
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Cam action indexing plungers GN 712.1 are used in such applications where the plunger pin has to protrude only occasionally. When turning the cam by 90° resp. 120° degrees in...Meer tonen
Art.-Nr.
1211711
Leveranciersnummer
712-10-M16X1,5-R
EAN
4045525496408
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Art.-Nr.
1211723
Leveranciersnummer
712-8-M16X1,5-R
EAN
4045525496392
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Indexing plungers GN 417 with flange are mounted parallel to the plungers and are characterized by an especially low height. The mounting hole pattern with slots offers generous...Meer tonen
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...Meer tonen
Indexing plungers GN 607.3 have been developed for installation in thin walled equipment. It has to be taken into consideration that, depending on the mounting plate thickness...Meer tonen
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°. A...Meer tonen
Art.-Nr.
1211975
Leveranciersnummer
717-8-M16X1,5-C-NI
EAN
4045525507111
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Art.-Nr.
1353456
Leveranciersnummer
817-4-6-CK-RT
EAN
4045525871182
Aantal
1 stuk
Indexing plungers GN 817.3, together with guide bushings DIN 172 / DIN 179, enable precise positioning. The bushings are used to guide the plunger pin as well as for the...Meer tonen