Star knobs GN 6336.5 comply with DIN 6336 type L.
Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Going beyond the DIN standard, handwheels DIN 950 are also available with Ø d1 = 180 and in types F and D with fixed or revolving handle.
Oil sight glasses GN 743.1 offer a sight glass of high stability and scratch proof. The seal is achieved with an O-ring on the periphery and not on the face edge of the glass....show more
Construction tubes GN 990 can be supplied in these standard lengths. The tolerances specified for the outside diameter of the round construction tubes comply with the...show more
Ball lock pins GN 113.12 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed...show more
Item-no.
1201252
Supplier number
352-30-20-M8-S-55
EAN
4045525597228
Quantity
1 Piece
Item-no.
1285471
Supplier number
352-50-50-M10-S-55
EAN
4045525029958
Quantity
1 Piece
Stainless steel tension levers GN 212 are used as clamping element as well as operating levers.
For mounting clamps, the clamping kits GN 511 replace the socket cap screws with hexagonal socket DIN 912. It is used on all clamping points where repeated clamping actions are...show more
Item-no.
1194614
Supplier number
300-45-M6-20-RS
EAN
4045525758834
Quantity
1 Piece
Adjustable hand levers GN 300.5 with solid stainless steel handle, correspond to applications where „aggressive“ surrounding conditions are given, or where stainless steel...show more
Star knobs GN 6335.5 comply with DIN 6335 type L.
Stainless steel indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob...show more
Tube end plugs GN 991 have been designed for sealing tube ends for safety or optical reasons. They are pressed into the tube end either by hand or with a mallet.
Stainless steel shoulder screws ISO 7379 are cost-saving construction elements for a wide variety of different uses. The maximum tightening torque is limited by the relatively...show more
The clamping bore of flanged connector clamps GN 147 is not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. The versions with square...show more
Gear lever handles GN 310 are highly universal options for movement and operation. Actuation of hydraulic valves and control levers eccentric cams are example uses of these...
The static load of the leveling feet GN GN 343.6 is limited by the load capacity of the ball joint / threaded stud (AISI 303). The static load values in the above table refer to...show more
Retaining magnets GN 50.3 are combined with the steel housing and the plastic ring into a system that shields and strengthens the magnet for optimal transmission of the magnetic...
Toggle clamps GN 820 work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action. In the...show more
Type G or GK of the indexing plungers GN 617 have been designed for applications where the indexing plunger is not operated with the standard knob. The indexing plungers are...show more
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities. If required, the indexing...show more
Leveling feet GN 30 will be delivered mounted and are not removable.