Item-no.
1828356
Supplier number
725.3-132-M6-A-OR
EAN
4063632055486
Quantity
1 Piece
Item-no.
1828360
Supplier number
725.3-132-M8-A-OR
EAN
4063632055523
Quantity
1 Piece
Item-no.
1827605
Supplier number
429-A4-12-160-MT-F
EAN
4045525985544
Quantity
1 Piece
Item-no.
1827607
Supplier number
429-A4-12-200-MT-F
EAN
4045525985728
Quantity
1 Piece
Central screws GN 21b connect aluminum profiles at right angles. Only one profile has to be machined. The thread in the end face profile hole is formed by the central screw...show more
With centering bore clamps GN 411.2 workpieces can be centrally positioned and clamped from the inside of the bore. They offer the following advantages: - Precise self centering...show more
Centering guide bushings GN 870 ensure accurate location of the clamping jaws and static holders, as well as the power clamps. At the same time they absorb side thrust and...show more
Bull´s eye spirit levels GN 2279 are used to check the horizontal position of jigs, machines, devices, appliances and instruments. Type A is used if the spirit level is to be...show more
Bull´s eye spirit levels GN 2278 are used to check the horizontal position of jigs, machines, devices, appliances and instruments. The housing is grooved at its lower diameter...show more
Collar clamps GN 873 greatly increases the mounting possibilities and, with that, the field of applications for power clamps is vastly increased. The abutting shoulder can be...show more
With clamping arm extenders GN 809.1, various toggle clamps with “solid clamping arm” can be easily and quickly extended. The slot of the extender corresponds to the dimensions...show more
Clamping arm extenders GN 801.2 are used together with toggle clamps with “forked clamping arm” to clamp something simultaneously at two points in parallel, such as with...show more
Clamping arm extenders GN 810.17 are accessory for knee lever modules GN 810.12 / GN 810.13.
Clamping arm extenders GN 801.1 are used together with toggle clamps with “forked clamping arm” to clamp something simultaneously at two points in parallel, such as with...show more
Clamping arms GN 875.2 with slotted hole designed as accessories to swing clamps GN 875 / GN 876. The slotted hole allows arbitrary positioning of application-specific pressing...show more
Item-no.
1397688
Supplier number
875.2-AL-20-85-HE
EAN
4045525526914
Quantity
1 Piece
Clamping arms GN 875.3 with threaded hole designed as accessories to swing clamp GN 875 / GN 876. The thread can receive an application-specific clamping bolt. The angle...show more
Clamping bolts GN 918.1 have a circumferential wedge surface. They allow for rapid and secure clamping and releasing with a relatively large clamping range and with high...show more
Clamping bolts GN 918.6 have a circumferential wedge surface. They allow for rapid and secure clamping and releasing with a relatively large clamping range and with high...show more
With the shaft clamping units GN 928, round workpieces from 6 to 125 mm can be rapidly, accurately and economically clamped. The threaded hole d5 can be used for attaching a jig...show more
Clamping knobs with indexing plunger GN 7336.7 are used for positioning, securing and clamping adjusting elements at the same time. The axial movement of the handle (pulling)...show more
Split hubs GN 150 are distinguished by the method of simple clamping to any shaft. This can be achieved without prior machining of the shaft, eliminating clamping parts and...show more
Split hubs GN 150 are distinguished by the method of simple clamping to any shaft. This can be achieved without prior machining of the shaft, eliminating clamping parts and...show more
Spannbacken-Rohlinge GN 872 sind dafür ausgelegt durch zusätzliche Bearbeitung des Anwenders mit individuellen Spannformen wie z.B. Prismen und Radien versehen zu werden. Die...show more