Item-no.
1563493
Supplier number
875.4-AL-12-30-HE
EAN
4045525795914
Quantity
1 Piece
Adapter flanges GN 875.4 are designed as accessories to swing clamps GN 875 / GN 876 and serve as adapter for mounting custom clamping arms. The angle orientation of the...show more
Adapters GN 725.2 allow you to install GN 725.1 cabinet U-handles on pipes / rods with diameters ranging from 28.6 mm to 32 mm.
Adapter 649.1 allow panel support clamps GN 649 to be mounted to round tubes. Mounting the M6 blind rivet nut requires a commercial blind rivet nut pliers or a setting tool. The...show more
Leveling feet GN 20 without mounting holes comply with the 3-A sanitary standard 88-01 and the DGUV Test guidelines, making them suitable for use in hygienic areas. The bottom...show more
Leveling feet GN 20 with mounting holes comply with the guidelines of the EHEDG, the 3-A sanitary standard 88-01 and the DGUV testing principles, making them extremely suitable...show more
Item-no.
1347628
Supplier number
339-29-M6-30-KR-NI
EAN
4045525962989
PU (Packaging)
4 Piece
Quantity
1 Piece
Item-no.
1347630
Supplier number
339-29-M6-45-KR-NI
EAN
4045525963313
PU (Packaging)
4 Piece
Quantity
1 Piece
Leveling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw. For this reason they offer the advantage of reduced...show more
The setting screw in the stainless steel hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole...show more
The setting screw in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating...show more
Clamping pads GN 709.3 are used as movable supports or plungers for clamping workpieces. They can also be used as stops. After the clamping process, the contact surfaces of...show more
Two-way breathable membranes GN 7404 are used when constructing housings and equipment. When installed in the wall of a housing, they can be used to equalize the pressure...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...show more
Oil sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil color or oil viscosity. The advantage of this...show more
Anschlagpunkte GN 589.5 sind zum Einhängen von Anschlagmitteln und Zurrmitteln bestimmt und zeichnen sich durch ihre besonders niedrige Bauform aus. Sie werden z. B. an...show more
The static load of the leveling feet GN 343.1 is limited by the load capacity of the ball joint (property class 5.8). The static load values in the table refer to a net vertical...show more
Leveling feet GN 6311.6 are used for installing and leveling devices and equipment. The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the...show more
Item-no.
1657726
Supplier number
6311.6-100-M16-59-R
EAN
4045525882348
Quantity
1 Piece
The specified load in the above table of the leveling feet GN 342.1 is a recommendation up to which the dampening element can be permanently subjected. This static load equals a...show more
The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected. This static load equals a thrust on the area of 0,4 N/mm2,...show more