This oil sight glasses GN 545.2 do not require a thread. The obliquely placed ribs and the elasticity of the plastic ensure that the oil level sight glass fits firmly into the...Meer tonen
Oil sight glasses GN 541 have very high mechanical strength. This allows them to be relatively thin while offering a large viewing window. These oil sight glasses can also be...Meer tonen
A special feature of oil level indicators GN 650 is that the liquid level is visible even from the side. The polyamide body consists of two parts which are ultrasonically welded...Meer tonen
Owing to the U-rail and the cover, oil level indicators GN 654 are extremely stable and are therefore suitable for great lengths. The fluid level can also be viewed from the...Meer tonen
Oil level indicators GN 650.2 are supplied with a protective housing made of die-cast zinc or plastic which allows them to be used in harsh conditions. The liquid level can be...Meer tonen
Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
Breather caps GN 552.1 with sealing disk vents the tank after a lower pressure of 10 or 100 mbar respectively is reached. The sealing disk prevents the contamination of the oil...Meer tonen
Once the opening pressure given in the table is exceeded, breather valves GN 881 with gasket will vent into a container and so protect against excessive inside container...Meer tonen
Precision type swing bolts DIN 444 are mainly used for jigs and fixtures. Produced in a precision version as is required in machine and jig construction, the stated tolerances...Meer tonen
Retaining rings GN 111.6 can be revolving mounted on the cut-in onto shaft ends or handle. Star knobs, for example, can be secured against loss at the place of use with an...Meer tonen
Oval tubular handles GN 334 are attractive in design and highly stable. The handle tube can be mounted without any further machining, allowing special lengths to be realised...
Art.-Nr.
1213296
Leveranciersnummer
76-25-M6-D
EAN
4045525373013
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Accessories for threaded plugs GN 745 / GN 745.2.
Sheet metal hinges GN 136 are available in many different versions and are suitable for light to medium-duty applications.
Position indicators GN 954 are fitted with a direct drive counter with digital read out. The two housing parts are ultra-sonically welded, thus the housing is particularly...Meer tonen
Position indicators GN 000.3 have been shaped for installation into different operating elements. The salient features of these counters are: The housing, the hand spindle, and...Meer tonen
Positioning bushings with ramping cone GN 412.3 are used in connection with bolts of indexing plungers. The threads are adapted to the mounting blocks GN 412.1 and GN 612.1.
Art.-Nr.
1224398
Leveranciersnummer
711.3-AL-1
EAN
4045525941724
Aantal
1 stuk
Reling-T-Klemmhalter GN 476.2 verbinden Rohre und Stangen T-förmig miteinander. Sie werden z. B. für Seitenführungen eingesetzt, bei denen der Klemmhalter seitlich nicht...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table. The eye nut must be of fully screwd in to...Meer tonen
Magnetic plugs GN 738.5 attract iron particles which might be floating in the fluid. The stainless steel makes them suitable for use in particularly aggressive environments. To...Meer tonen
A special feature of oil level indicators GN 650.1 is that the liquid level is visible even from the side. The polyamide body consists of two parts which are ultrasonically...Meer tonen