Latch type toggle clamps GN 850.1 are especially suited for rapid closing and fastening of lids, flaps and molds. During clamping, the pivoting movement of the clamping lever is...Meer tonen
Rubber buffers GN 456 provide elastic support for equipment such as compressors and pumps. The tapered shape absorbs side forces better compared with cylindrical rubber buffers....Meer tonen
Rubber buffers GN 451 are suitable for the elastic mounting of machine units such as motors, compressors and pumps.
Rhombus T-nuts GN 508.1 can be inserted vertically into the T-slot.
Räder GN 22885 werden in industriellen und öffentlichen Innenbereichen beispielsweise zum Verschieben von Transportwagen eingesetzt. Der Laufbelag der Räder bewirkt einen...Meer tonen
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head. Thanks to...Meer tonen
Hinges GN 237.1 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the fastening holes.
The actuating torque of the hinges GN 233 can be adjusted via a setting screw, allowing doors and flaps to be kept open or partially open or closed. Endurance tests have shown...Meer tonen
Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the...Meer tonen
Hinges GN 122.1 with indexing positions keep the door in the three specified positions without additional mechanism. In indexing position the loosening torque is 1.1 Nm (test...Meer tonen
Hinges, Detachable, Zinc Die casting
Hinges GN 158 have a special feature in that they cannot be dismantled from the outside. The assembly is only possible from the inside. The pin is not accessible since it is...Meer tonen
Art.-Nr.
1191330
Leveranciersnummer
236-75-60
EAN
4045525519978
VPE (Verpakking)
2 stuk
Aantal
1 stuk
Art.-Nr.
1217878
Leveranciersnummer
136-ST-40-40-B
EAN
4045525852617
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Leveling feet GN 344.2 feature a conductive ESD plastic material (PA) or rubber (NBR) which prevents static charges from building up. The imprint ESD-C on the surface of the...Meer tonen
Washers DIN 6340 are mainly used for elongated holes. Size 15 is not on the official DIN standard sheet.
Disk handwheels DIN 3670 have recessed grips at their back. As a rule they are supplied without handle, but the mounting of a handle is possible. The handwheel diameter d1=80...Meer tonen
C-Washers GN 183 maybe installed without the removal of the nut from the stud. In terms of dimensions they are almost identical to C-Washers DIN 6372.
Disk handwheels GN 323 have recessed grips at their back.
Handwheels GN 323.8 have a recessed hub to accept position indicators GN 000.8 / GN 000.3. The hub dimensions (for fitting) correspond to those of disc handwheels GN 323 and/or...
Verschlussschrauben DIN 910 werden beispielsweise an Einfüll-, Ablass- oder Kontrollöffnungen von Getrieben oder Hydrauliktanks eingesetzt.
Threaded Plugs, Plastic
Threaded plugs DIN 906 are used to close bore holes with cylindrical internal thread. The tightness depends on the medium, pressure, temperature and material pairing. The design...Meer tonen
Art.-Nr.
1485943
Leveranciersnummer
742.5-22-M16X1,5-A-1
EAN
4045525747357
Aantal
1 stuk