Torque limiting triangular knobs GN 5320 are used when the manually applied torque is to be limited. When turned clockwise, the torque mechanical system of the triangular knob...Meer tonen
Torque limiting knurled knob screws GN 5910 are used when the manually applied torque is to be limited. The torque limit can be set between 0.2 Nm and 1 Nm. When turned...Meer tonen
The PTFE coated surfaces of the coupling attachments GN 000.4 provide minimal friction between bearing surfaces even when lubrication is being neglected. An oil hole is provided...Meer tonen
The use of needle bearings and the hardened bearing surfaces make the clutch engagement extremely easy. This is also assisted by the finer teeth of the clutch and the increased...Meer tonen
Collar Bushings, Accessories for Scaling Sets
Hand knobs GN 6335.2 with protruding steel bushing have important advantages: The face of the bushing is exactly square to the bore and is with the complete diameter out of...Meer tonen
Hand Knobs, Casting Only, Cast Iron / Aluminum, without Bore
Stainless Steel Hand Knobs, Stainless Steel, without Bore, Casting Only
Hand Knobs, Stainless Steel
Hand Knobs, Cast Iron
Hand Knobs, Plastic, Bushing Brass
Hand knobs DIN 6335 with bore H7 are available as GN 6335.1 / GN 6335.2.
Hand knobs GN 6335.2 with protruding stainless steel bushing have important advantages: The face of the bushing is exactly square to the bore and is with the complete diameter...Meer tonen
Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages: Doubled clamping force...Meer tonen
Hand Knobs, Cast Iron, Zinc Plated, Blue Passivated
Art.-Nr.
1209384
Leveranciersnummer
6335.4-SK-32-M6-30
EAN
4045525332140
VPE (Verpakking)
25 stuk
Aantal
1 stuk
Art.-Nr.
1209387
Leveranciersnummer
6335.4-SK-40-M8-15
EAN
4045525332232
VPE (Verpakking)
25 stuk
Aantal
1 stuk
The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.
Hand Knobs, Aluminum, Threaded Stud Stainless Steel
Hand Knobs, Stainless Steel
The hand knobs have an immaculate contact or clamping surface thanks to the protruding stainless steel bushing.
Stainless steel cranked handles GN 269 have been designed to comply with stringent hygiene requirements. The cylindrical handles are made of thermoset material which in general...Meer tonen
Bearing blocks GN 828 are used in combination with adjusting screws GN 827 for simple adjustment and positioning tasks. For processing and assembly equipment on which...Meer tonen