Art.-Nr.
1219638
Leveranciersnummer
1524-M16-80-NI
EAN
4045525963696
Aantal
1 stuk
Positioning elements GN 409.2 with female thread are designed for use as locating plungers, stops and thrust blocks.
Guide pins GN 771.2 are used in combination with GN 172.1 / GN 179.1 guide bushings. The shaft tolerance p6...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in...Meer tonen
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in...Meer tonen
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted...Meer tonen
Washers DIN 6340 are mainly used for elongated holes. Size 15 is not on the official DIN standard sheet.
Verschlussschrauben DIN 910 werden beispielsweise an Einfüll-, Ablass- oder Kontrollöffnungen von Getrieben oder...Meer tonen
The thread locking PRB (polyamide allround coating) is a clamping lock which prevents the locking screw from being...Meer tonen
Stainless steel washers / Leveling disks GN 6343 are used mainly in mechanical engineering and jigmaking if shimming...Meer tonen
Slotted locknuts GN 1804.1 are self-locking owing to their polyamide insert. They can therefore also be used as a...Meer tonen
Stainless steel washers GN 6341 are used mainly in mechanical machine and jig construction when washers DIN 125, DIN...Meer tonen
Guide rollers GN 753 can be used as guides, bearings or supports for small to medium loads. They can also be used to...Meer tonen
Guide rollers GN 753.1 can be used as guides, bearings or supports for small to medium loads. They can also be used...Meer tonen
Grub screws GN 913.6 with retaining magnets combine a magnet with a steel housing in the shape of a threaded rod to...Meer tonen
Grub screws GN 913.3 with pivot in brass or pivot are used in applications, where marks and damage on the workpiece...Meer tonen
Star nuts GN 567 can be used to lock and secure and require minimal space. The ergonomic shape makes them easy to...Meer tonen
Art.-Nr.
1724488
Leveranciersnummer
50B-10M8-S-SZ
EAN
4045525889118
Aantal
1 stuk
Art.-Nr.
1209222
Leveranciersnummer
DIN 6330-M12-B
EAN
4045525326927
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Hex nuts DIN 6330 are used on clamping applications which require frequent clamping and unclamping (m = 1,5 x d1)....Meer tonen
Art.-Nr.
1132314
Leveranciersnummer
DIN 6331-M16
EAN
4045525327122
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1076572
Leveranciersnummer
DIN 6331-M24
EAN
4045525327153
Aantal
1 stuk
Thin hex nuts ISO 4035 are used in bolted connections, e.g. as lock nuts to lock components and prevent accidental...Meer tonen
Levelling sets GN 350.5 are used for levelling, adjusting and linking operations. The spherical washer allows precise...Meer tonen