Art.-Nr.
1294144
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Once the opening pressure given in the table is exceeded, breather valves GN 883 will vent into a container and so protect against excessive inside container pressure. They also...Meer tonen
The dimensions of the threaded plugs GN 749 largely comply with DIN 908, and the outer diameter d2 is adapted to the threaded holes of pipe fittings as per DIN 3852. In...Meer tonen
Neuer Markenname: Promat wird TECWERK
Art.-Nr.
1427690
Leveranciersnummer
4300000212
EAN
4015448780809
Aantal
1 stuk
Art.-Nr.
1294145
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1294146
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Oil sight glasses GN 743.1 offer a sight glass of high stability and scratch proof. The seal is achieved with an O-ring on the periphery and not on the face edge of the glass....Meer tonen
Accessories for threaded plugs GN 745 / GN 745.2.
Magnetic plugs GN 738.5 attract iron particles which might be floating in the fluid. The stainless steel makes them suitable for use in particularly aggressive environments. To...Meer tonen
From thread size G½ upwards, the seal of the plugs GN 548.1 is embedded in a radial undercut. For this reason the seal cannot be extruded when tightening the plug. MAX-MIN lines...Meer tonen
Breather filters GN 882 are used when the air exchange is to be allowed between the inside of the container and the ambient air. The filter function is marked by a blue colour...Meer tonen
A special feature of oil level indicators GN 650 is that the liquid level is visible even from the side. The polyamide body consists of two parts which are ultrasonically welded...Meer tonen
Welding sockets GN 7490 are used to attach threaded connections to containers, tanks or hydraulic cylinders via welding. Filling and draining screw plugs as well as aeration and...Meer tonen
Magnetic plugs GN 738 attract iron particles which might be suspended in the liquid. To avoid breakage or de-magnetising, round rod magnets are fitted with a plastic distance...Meer tonen
Oil sight glasses GN 743 offer a sight glass of high stability and scratch proof. The seal is achieved with an O-ring on the periphery and not on the face edge of the glass....Meer tonen
Oil drain valves GN 880 may be used for draining non-pressurised oil. As well conditionally as for vacuum drainage. The flow volume (l/min.) depends on the viscosity of the...Meer tonen
Oil sight glasses GN 541 have very high mechanical strength. This allows them to be relatively thin while offering a large viewing window. These oil sight glasses can also be...Meer tonen
The window of oil sight glasses GN 543.2 is embedded in the body during the injection process and it is therefore absolutely leaktight. The sealing ring is embedded in a radial...Meer tonen
Owing to the U-rail and the cover, oil level indicators GN 654 are extremely stable and are therefore suitable for great lengths. The fluid level can also be viewed from the...Meer tonen
With oil level indicators GN 656, the fluid level can not only be viewed, it can also be monitored using an electric contact. A float with a magnet is located within the...Meer tonen
Art.-Nr.
1294149
VPE (Verpakking)
5 stuk
Aantal
1 stuk
Breather caps GN 552.1 with sealing disk vents the tank after a lower pressure of 10 or 100 mbar respectively is reached. The sealing disk prevents the contamination of the oil...Meer tonen
ATEX-Breather caps GN 552.6 are suitable for use in an explosion risk environment. They comply with the guidelines (ATEX) 2014/34/EU. MAX-MIN markings can easily be marked on...Meer tonen
Once the opening pressure given in the table is exceeded, breather valves GN 881 with gasket will vent into a container and so protect against excessive inside container...Meer tonen