Connector pieces GN 880.1 are required when using oil drain valves GN 880. Screwing on the connector piece will activate the valve plate of the oil drain valve, allowing the oil...Meer tonen
Stainless steel welding sockets GN 7490 are used to attach threaded connections to containers, tanks or hydraulic cylinders via welding. Filling and draining screw plugs as well...Meer tonen
A special feature of oil level indicators GN 650.1 is that the liquid level is visible even from the side. The polyamide body consists of two parts which are ultrasonically...Meer tonen
Threaded plugs GN 742.5 can be used in particularly aggressive environments thanks to the material used. The seal is embedded in a radial recess and thus cannot be lost,...Meer tonen
Threaded plugs DIN 906 are used to close bore holes with cylindrical internal thread. The tightness depends on the medium, pressure, temperature and material pairing. The design...Meer tonen
When flow indicators GN 655 are used, a rotor rotates above a minimum volume flow rate Q, depending on the medium and its viscosity. The flow rate is visible from all sides....Meer tonen
Function and operational criteria of breather caps GN 663, see description of function. Breather caps can be connected by either a threaded or a bayonet (BA) fitting and filler...Meer tonen
Filler strainers GN 664 are available with mounting flange for threaded or bayonet (BA) connection. Filler strainers prevent the ingress of coarse impurities during the...Meer tonen
Threaded plugs GN 740 are generally supplied as drain plugs in red color.
Threaded plugs GN 741 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Threaded plugs GN 742 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....Meer tonen
Oil sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil color or oil viscosity. The advantage of this...Meer tonen
ATEX-Sight glasses GN 541.6 are suitable for use in an explosion risk environment. They comply with the guidelines 2014/34/EU. A detailed operating instruction is available and...Meer tonen
ATEX-Sight glasses GN 543.6 are suitable for use in an explosion risk environment. They comply with the guidelines (ATEX) 2014/34/EU. A detailed operating instruction is...Meer tonen
Two-way breathable membranes GN 7404 are used when constructing housings and equipment. When installed in the wall of a housing, they can be used to equalize the pressure...Meer tonen
The breather filters GN 884 are used when the air exchange is to be allowed between the inside of the container and the ambient air. The stainless steel wire mesh prevents...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Mounting nuts GN 7430 are used, for example, to fasten breather elements, oil level sight glasses or threaded plugs when the wall is too thin for inserting a thread or this is...Meer tonen
Mounting nuts GN 7430 are used, for example, to fasten breather elements, oil level sight glasses or threaded plugs when the wall is too thin for inserting a thread or this is...Meer tonen