Indexing plungers GN 417 with flange are mounted parallel to the plungers and are characterized by an especially low height. The mounting hole pattern with slots offers generous...show more
Indexing plungers GN 417 with flange are mounted parallel to the plungers and are characterized by an especially low height. The mounting hole pattern with slots offers generous...show more
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...show more
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°. A...show more
Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90°...show more
Item-no.
1353445
Supplier number
817-16-20-CK-RT
EAN
4045525069770
Quantity
1 Piece
Item-no.
1353456
Supplier number
817-4-6-CK-RT
EAN
4045525871182
Quantity
1 Piece
Item-no.
1213947
Supplier number
817-6-6-CK-RT
EAN
4045525613911
Quantity
1 Piece
Indexing plungers GN 607 are distinguished for their small dimensions. The extremely low lock nuts GN 909 enlarge the mounting options.
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment. It has to be taken into consideration that, depending on the mounting plate thickness...show more
With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB...show more
With indexing plungers GN 722.6, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB...show more
Washers DIN 6340 are mainly used for elongated holes. Size 15 is not on the official DIN standard sheet.
The application examples given above demonstrate the versatility of disks with cover cap GN 338. Removal of the cover can be done by inserting a screwdriver in the gap on the edge.
Spring-bolt door latches GN 449.1 can be mounted on shaped parts and make it easier to hold swinging doors. The slots allow the spring-bolt door latches to be mounted on shaped...show more
Spring-bolt door latches GN 449 are an easy way of holding swing doors shut. They are resistant to wear and have a high retaining force. In the design with finger handle (Type...show more
Latches GN 117 lock by a turning operation clockwise (right), which moves the cam latch into the locked position behind the door frame. The latches are vibration proof and have...show more
Latches GN 119 lock by a turning operation clockwise (right), which moves the cam latch into the locked position behind the door frame. The latches have a pulling-in range of 10...show more
Double hinges GN 159.1 are suitable for simple installation on standard commercially available extrusions to support the weight of a door by utilising the enclosed rectangular...show more
Item-no.
1207888
Supplier number
607.9-SW14-SW16
EAN
4045525309067
Quantity
1 Piece
Threaded plugs GN 740 are generally supplied as drain plugs in red color.
Threaded plugs GN 741 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....show more
Threaded plugs GN 742 are fitted with outside diameter d1 to suit screw holes with BSP threads to DIN 3852. The sealing ring is embedded in a radial recess on the flat side....show more
Stainless steel spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.