Indexing plungers GN 607.2 have been developed for installation in thin walled equipment. It has to be taken into consideration that, depending on the mounting plate thickness...show more
With indexing plungers GN 722.5, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB...show more
With indexing plungers GN 722.6, the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ZB...show more
Item-no.
1207888
Supplier number
607.9-SW14-SW16
EAN
4045525309067
Quantity
1 Piece
Stainless steel spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.
Spring plungers GN 611 are used as ejectors, push-on and push-off operations in the sheet metal industry, as well as cushioners. The slot on the plunger side is provided for...show more
Spring plungers GN 614.3 are used for locking as well as for pressure and hold-off functions. A simple mounting hole is sufficient for mounting. The spring plungers are inserted...show more
Spring plungers GN 615.1 are used as detents as well as for push-on and push-off applications and ejectors.
Spring plungers GN 615.4 are used as detents as well as for push-on and push-off applications and ejectors.
Spring plungers GN 614.2 are a result of a further development of spring plungers type GN 614 for special applications. A tolerance H8 is recommended for the locating bore of d1.
Spring plungers GN 614.5 are used as detents as well as for push-on and push-off applications and ejectors. The geometric shape of the plastic housing generates a self-clamping...show more
Side thrust pins GN 614.1 are used for arresting and as press-on or press-off elements. The easy attachment using one or two countersunk screws also allows its use where a...show more
Press-fit stainless steel spring plungers GN 614.7 are used as detents as well as for push-on and push-off applications and ejectors. The tolerance d1 H7 is recommended for the...
Latches GN 515 are identical to standard latches GN 115 except for the extended housing. They are operated with a rotation limited to 90°, which moves the latch arm into the...show more
Latches GN 515 are identical to standard latches GN 115 except for the extended housing. They are operated with a rotation limited to 90°, which moves the latch arm into the...show more
Item-no.
1828391
Supplier number
615.10-M10-KN
EAN
4045525974753
Quantity
1 Piece
Item-no.
1828392
Supplier number
615.10-M10-KSN
EAN
4045525974760
Quantity
1 Piece
Item-no.
1828393
Supplier number
615.10-M12-KN
EAN
4045525974777
Quantity
1 Piece
Item-no.
1828394
Supplier number
615.10-M12-KSN
EAN
4045525974784
Quantity
1 Piece
Item-no.
1828395
Supplier number
615.10-M16-KN
EAN
4045525974791
Quantity
1 Piece
Item-no.
1828396
Supplier number
615.10-M16-KSN
EAN
4045525974807
Quantity
1 Piece
Item-no.
1828397
Supplier number
615.10-M5-KN
EAN
4045525974814
Quantity
1 Piece
Item-no.
1828398
Supplier number
615.10-M5-KSN
EAN
4045525974821
Quantity
1 Piece
Item-no.
1828399
Supplier number
615.10-M6-KN
EAN
4045525974838
Quantity
1 Piece