Hinges GN 237.1 have a design that makes them perfect for attaching panels, such as of glass or plastic. For installation, set the centering aid d3 of the hinge against an...Meer tonen
The stroke of the square U-bolts of latch type toggle clamps GN 851.1 can be adjusted within its range. In the clamped position the square U-bolt is perpendicular to the...Meer tonen
Toggle latches GN 832 are used for the secure holding of flaps, container lids, machine coverings and similar applications. The clamping stroke exceeds the dead centre point...Meer tonen
Characteristic of the star knobs GN 5337.2 is the 5 lobes. They not only give the knobs a specific style but this shape has also enabled the operator to achieve a higher torque.
Retaining cables GN 111.2 are available in 5 different types and can therefore be used in a wide range of applications, e.g. for loss protection or as connecting and mounting...Meer tonen
Art.-Nr.
1213163
Leveranciersnummer
751-16-32-M16F-B
EAN
4045525372092
Aantal
1 stuk
Angle pieces and shackles GN 967 are preferably used in connection with profile systems. Square connections or connections with same contact area can so be realised in the...Meer tonen
Hinges GN 128.2 are produced from drawn weldable profiled stainless steel extrusions. The pin is fixed in the lower half.
The clamping bore of swivel clamp connectors GN 276 is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. At the screw location...Meer tonen
Cabinet U-handles GN 628 are designed with ergonomic shapes to match the Ergostyle product family. They can also be used as complementary handles for cabinet U-handles GN 628.4...Meer tonen
Art.-Nr.
1353239
Leveranciersnummer
DIN 7603-AL-14-18-A
EAN
4045525899254
VPE (Verpakking)
10 stuk
Aantal
10 stuk
Dust caps GN 710 prevent the entering of dirt into angled ball joints DIN 71802.
Spoked Handwheels, Plain, Rim Polished
The static load of the leveling feet GN 343.1 is limited by the load capacity of the ball joint (property class 5.8). The static load values in the table refer to a net vertical...Meer tonen
Art.-Nr.
1722683
Leveranciersnummer
103-16X4-1000-RH-NI
EAN
4045525954427
Aantal
1 stuk
Trapezgewindespindeln GN 103 wandeln in Verbindung mit Trapezgewindemuttern Drehbewegungen in lineare Bewegungen um. Sie werden eingesetzt, wenn Bauteile bewegt und Kräfte...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the...Meer tonen
Protective caps GN 806 can be used with hexagon screws ISO 4017 or together with threaded pins type B as thrust pins with soft clamping head surface, or as soft end stop bolts....Meer tonen
Art.-Nr.
1481797
Leveranciersnummer
7430-M16X1,5-MS
EAN
4045525573093
Aantal
1 stuk
Art.-Nr.
1481811
Leveranciersnummer
7430-M26X1,5-A4
EAN
4045525573253
Aantal
1 stuk
Art.-Nr.
1481812
Leveranciersnummer
7430-M33X1,5-A4
EAN
4045525573260
Aantal
1 stuk
Art.-Nr.
1657869
Leveranciersnummer
7090-28-M4-A-MT-H
EAN
4045525932968
Aantal
1 stuk
Stainless steel spherical washers and dished washers DIN 6319 are used for clamping on non-parallel surfaces. Thanks to the material used, the spherical washers and dished...Meer tonen