Art.-Nr.
1481797
Leveranciersnummer
7430-M16X1,5-MS
EAN
4045525573093
Aantal
1 stuk
Art.-Nr.
1481811
Leveranciersnummer
7430-M26X1,5-A4
EAN
4045525573253
Aantal
1 stuk
Art.-Nr.
1481812
Leveranciersnummer
7430-M33X1,5-A4
EAN
4045525573260
Aantal
1 stuk
Art.-Nr.
1657869
Leveranciersnummer
7090-28-M4-A-MT-H
EAN
4045525932968
Aantal
1 stuk
Stainless steel spherical washers and dished washers DIN 6319 are used for clamping on non-parallel surfaces. Thanks to the material used, the spherical washers and dished...Meer tonen
Cabinet U-handles GN 425.7 made of steel feature a plastic grip which, owing to its insulating properties, allows it to be used under high surface temperatures. The above...Meer tonen
Indexing plungers GN 717 are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning...Meer tonen
Stainless steel indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob. Type C / CK are used for such applications where the plunger has to stay in...Meer tonen
Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities. If reqiured, the indexing...Meer tonen
Stainless steel indexing plungers GN 608.5 are distinguished for their small dimensions.
Assembly pins GN 2342 are characterized by their use in diverse applications. Depending on the requirement there are three washer types to choose from, which place the assembly...Meer tonen
The handle tube of the GN 333.1 tubular handles can be screwed to the handle bases without further machining or processing, allowing special lengths to be realised easily....Meer tonen
Pins with axial lock GN 114.3 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often...Meer tonen
Typical in design are the revolving handles GN 798.1 with their stepped shape consisting of two cylinders giving the operator a better grip.
When using the cylindrical knobs GN 519, make sure that the threaded pin is not too short. Otherwise the plastic element may break under excessive stress exposure.
The cylindrical knobs GN 519.1 do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end...Meer tonen
Stainless steel captive socket cap screws GN 912.2 can be used to prevent loss of the thumb screw, due to the d3 recessed portion of the stud. Thus the „captivity of the...Meer tonen
Clamping Levers, Stainless Steel
Stainless steel spherical washers and dished washers DIN 6319 are used for clamping on non-parallel surfaces. Thanks to the material used, the spherical washers and dished...Meer tonen
Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm,...Meer tonen
Stainless steel bezel disks GN 185 are used for shrouding screw joints when a visually nice finish is required. The purpose of the plastic disks supplied as a standard item on...Meer tonen
Besides the standard scale (coding MCRS) the scale rings can be supplied with any type of graduation. It is suggested to use the matte chrome plated version (MCR) so that a nice...Meer tonen
Cam Latches, Steel