Spiral retaining cables GN 111.4 are used in connection with low weight elements e. g. pins with axial lock and ball lock pins. They are distinguished for a large "usable...Meer tonen
Guide rollers GN 753 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems. With the radial...Meer tonen
Guide rollers GN 753.1 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems. The radial load...Meer tonen
Leveling feet GN 839.5 are used for applications in cases where no jointed link is required between foot and adjusting screw. The cross slot drive at the underside has been...Meer tonen
Steckbolzen GN 114.8 mit Axialsicherung werden zum schnellen Fixieren, Verbinden und Sichern verschiedener Bauelemente eingesetzt. Eine typische Anwendung sind Lagerbolzen, die...Meer tonen
Locking pins with axial lock GN 214.2 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...Meer tonen
The clamping bore of tube connectors GN 241 is not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462. The versions with square bores are...Meer tonen
Art.-Nr.
1398332
Leveranciersnummer
705-10-E-NI
EAN
4045525068001
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1398340
Leveranciersnummer
705-20-E-NI
EAN
4045525068087
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Art.-Nr.
1211353
Leveranciersnummer
705-30-E
EAN
4045525354098
Aantal
1 stuk
Art.-Nr.
1211403
Leveranciersnummer
705-75-A
EAN
4045525355088
Aantal
1 stuk
Semi-split shaft collars GN 706.2 can safely and simply be assembled by reducing the slot height with high clamping force and thus they act, for instance, like an end stop. The...Meer tonen
With semi-split shaft collars GN 7062.2, e.g., axles are attached to housing, or wheels and washers are installed on shafts. They can be assembled safely and easily with a high...Meer tonen
Stainless steel grub screws GN 632.5 with ball point are as a rule used with thrust pads GN 631 / GN 631.5. The ball Ø d2 is smaller than the thread core Ø, which allows fitting...Meer tonen
The thrust point of the grub screws DIN 6332 is designed to be used with or without the thrust pad for clamping. The pin diameter of the grub screws is smaller than the core...Meer tonen
Adjusting screws GN 827 are used in combination with bearing blocks GN 828 for simple adjustment and positioning tasks. For processing and assembly equipment on which...Meer tonen
Grub screws GN 632.1 with ball point are as a rule used with thrust pads GN 631. The ball Ø d2 is smaller than the thread core Ø, which allows fitting over the ball end. The...Meer tonen
Grub screws GN 913.3 with pivot in brass or pivot are used in applications, where marks and damage on the workpiece are unacceptable.
Stainless steel grub screws GN 913.5 with pivot in brass or plastic are used in applications, where marks and damage on the workpiece are unacceptable.
Leveling feet GN 19 comply with the 3-A sanitary standard 88-01 and the DGUV testing principles, making them suitable for use in in hygienic areas. The elastomer pad seals the...Meer tonen
Leveling feet GN 30 will be delivered mounted and are not removable.
Leveling feet GN 42 can be used in a host of combinations of base plates and adjustable spindle versions. The leveling feet can be screwed to the mounting surface use the fixing...Meer tonen
Art.-Nr.
1660663
Leveranciersnummer
17-100-M10-100-C3-SK
EAN
4045525849129
Aantal
1 stuk
Art.-Nr.
1660608
Leveranciersnummer
17-100-M20-250-C3-T
EAN
4045525849792
Aantal
1 stuk