Heavy duty hinges GN 237.3 are designed for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in...Meer tonen
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (loctite) or clamping is favoured. Type G has been designed for applications where the...Meer tonen
The stroke of the square U-bolts of stainless steel latch type toggle clamps GN 851 can be adjusted within its range. In the clamped position the square U-bolt is parallel to...Meer tonen
Toggle latches GN 832.2are used for the secure holding of flaps, container lids, machine coverings and similar applications. The clamping stroke exceeds the dead centre point...Meer tonen
Shaft collars GN 705 essentially comply with the versions of DIN 705. GN 705 also contains a number of practical intermediate sizes in addition to the DIN-versions as well as...Meer tonen
Leveling feet GN 33 will be delivered mounted and are not removable.
Hinges GN 128 are produced from drawn weldable profiled steel extrusions. Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel...Meer tonen
The rotary clamping latches GN 516.5 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen
Leveling feet GN 344.5 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Stainless steel indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob...Meer tonen
Art.-Nr.
1476149
Leveranciersnummer
1580-M6-12-MT-E
EAN
4045525583498
Aantal
1 stuk
Type G or GK of the indexing plungers GN 617 have been designed for applications where the indexing plunger is not operated with the standard knob. The indexing plungers are...Meer tonen
Stainless steel sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments....Meer tonen
Hinges GN 237 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.
Workholding bolts DIN 6321 are inserted into bores for positioning, assisted by the flattened design (type C) to compensate tolerances in the spacing of two bores. Another...Meer tonen
Setting bolts GN 251 can be used as as a firm end stop as well as for support. The version with Polyurethane disk (type BK) functions as damping element or protection for...
Stainless steel indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve...Meer tonen
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions. In type C, the...Meer tonen
Breather filters GN 882 are used when the air exchange is to be allowed between the inside of the container and the ambient air. The filter function is marked by a blue colour...Meer tonen
High-strength, cranked shackles GN 585 are made in analogy with the US Federal Specification RR-C-271 and feature sixfold safety standards, which means that the minimum failure...Meer tonen
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself....Meer tonen
Indexing plungers GN 7017 are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of...Meer tonen
Push-Pull Type Toggle Clamps, Steel, for Push-On Clamping
Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors. The slot on the plunger side is provided for blind hole applications. A...Meer tonen