Key rings GN 111.3 are suitable as universal connection elements for traction cables, ball chains, retaining straps etc. where light loads are possible. The black design is...Meer tonen
The official standard sheet of T-slot bolts DIN 787 also lists the sizes 5, 36, 42, 48 and 54.
Verschlussschrauben DIN 910 werden beispielsweise an Einfüll-, Ablass- oder Kontrollöffnungen von Getrieben oder Hydrauliktanks eingesetzt.
Art.-Nr.
1218390
Leveranciersnummer
DIN 906-NI-R1/4-GPC
EAN
4045525688513
Aantal
1 stuk
Threaded plugs GN 742.5 can be used in particularly aggressive environments thanks to the material used. The seal is embedded in a radial recess and thus cannot be lost,...Meer tonen
On stainless steel slotted locknuts DIN 1804 the ground surface d3 stands proud and should be used as a mating surface. The sizes M45x1,5 to M60x1,5 have 6 slots. The official...Meer tonen
Slotted locknuts DIN 70852 serve for adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example. The flat design of the slotted...Meer tonen
Slotted locknuts GN 1804.1 are self-locking owing to their polyamide insert. They can therefore also be used as a setting nut and may be used more than once. The thread series...Meer tonen
Latches GN 115.5 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing...Meer tonen
Latches GN 515 are identical to standard latches GN 115 except for the extended housing. They are operated with a rotation limited to 90°, which moves the latch arm into the...Meer tonen
The draw hook of the latch type toggle clamps GN 850 can be adjusted within the stroke.
The stroke of the square U-bolts of latch type toggle clamps GN 851.1 can be adjusted within its range. In the clamped position the square U-bolt is perpendicular to the...Meer tonen
Stainless steel washers GN 6341 are used mainly in mechanical machine and jig construction when washers DIN 125, DIN 9021 and DIN 6340 no longer meet requirements. In...Meer tonen
Locking joint sets GN 187.6 can be used to combine locking heads GN 187.5 to form locking joints. Thanks to the hexagonal shoulder, which creates a form-locking connection that...Meer tonen
Latch type toggle clamps GN 850.1 are especially suited for rapid closing and fastening of lids, flaps and molds. During clamping, the pivoting movement of the clamping lever is...Meer tonen
The stroke of the square U-bolt of latch type toggle clamps GN 851.2 can be adjusted within its range. In the clamped position the square U-bolt and the clamping arm are...Meer tonen
Spannriemen GN 1110 werden in verschiedenen Bereichen zum Befestigen, Fixieren und Spannen von Bauteilen verwendet.
Toggle latches GN 821 are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof. The...Meer tonen
Toggle latches GN 832.4 are used for the secure holding of flaps, container lids, etc. They lock securely over the center and are thus vibration proof. The components to be...Meer tonen
Toggle latches GN 831.2 are used for the secure holding of flaps, container lids, machine coverings and similar applications. The clamping stroke exceeds the dead centre point...Meer tonen
Guide rollers GN 753 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems. With the radial...Meer tonen
Guide rollers GN 753.1 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems. The radial load...Meer tonen
Locking pins with axial lock GN 214.3 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...Meer tonen
Locking pins with axial lock GN 214.6 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to...Meer tonen