Stop locks GN 720 may be used as stops and feature a high degree of stability. The inside ball-spring latching mechanism has 4 latching positions at a distance of 90° each....Meer tonen
Leveling feet GN 33 will be delivered mounted and are not removable.
Leveling feet GN 41 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...Meer tonen
Latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the latch arm. The device can be turned 90° only when the...Meer tonen
Latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the latch arm. The device can be turned 90° only when the...Meer tonen
The lockable latches GN 115 lock by a turning operation limited to 90° which moves the locking behind the door frame. The bevels of the locking ease the closing of the door....Meer tonen
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
Stainless steel sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments....Meer tonen
Double hinges GN 159.1 are suitable for simple installation on standard commercially available extrusions to support the weight of a door by utilising the enclosed rectangular...Meer tonen
Leveling feet GN 20 without mounting holes comply with the 3-A sanitary standard 88-01 and the DGUV Test guidelines, making them suitable for use in hygienic areas. The bottom...Meer tonen
Leveling feet GN 20 with mounting holes comply with the guidelines of the EHEDG, the 3-A sanitary standard 88-01 and the DGUV testing principles, making them extremely suitable...Meer tonen
Stainless steel hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low...Meer tonen
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head. Thanks to...Meer tonen
In terms of their dimensions, rubber bumper stops GN 2374 have been designed as extras for the GN 237 and GN 337 family of hinges. They can also be bolt-attached when mounting...Meer tonen
Plates GN 2376 are designed as accessories for multiple families of hinges. They make additional threaded holes, bolts, nuts and washers unnecessary during installation. This...Meer tonen
Leveling feet GN 32 will be delivered mounted and are not removable.
Leveling feet GN 344.2 feature a conductive ESD plastic material (PA) or rubber (NBR) which prevents static charges from building up. The imprint ESD-C on the surface of the...Meer tonen
Leveling feet GN 445 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Latches GN 623.1 lock by a turning operation limited to 90°, which moves the latch arm in the locked position behind the door frame. Latch arms with different bend angles cover...Meer tonen
Latches with gripping tray GN 731.5 are used in applications which require a moulded recess in addition to the latching mechanism, e.g. if operating elements are not allowed to...Meer tonen
Leveling feet GN 839 are used for applications in cases where no jointed link is required between foot and adjusting screw. The cross slot drive at the underside has been...Meer tonen
Leveling feet GN 439.5 are used for installing smaller machines, systems or devices. Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent...Meer tonen
Leveling feet GN 439 are used for installing smaller machines, systems or devices. Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface...Meer tonen
Leveling feet GN 44 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...Meer tonen