Art.-Nr.
1476147
Leveranciersnummer
1580-M5-MT-E
EAN
4045525583450
Aantal
1 stuk
Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations. This has a positive impact on the lifetime of machines and...Meer tonen
Latches GN 115.1 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. They are...Meer tonen
The rotary clamping latches GN 516 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen
Hinges GN 237.1 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the fastening holes.
Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust. Types A and S are fastened by welding or using holes created by the customer. Type S also has a...Meer tonen
Hinges, Plastic, White
Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. In the two-part design, the door can be...Meer tonen
Leveling feet GN 41 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...Meer tonen
Leveling feet GN 32 will be delivered mounted and are not removable.
Leveling feet GN 439 are used for installing smaller machines, systems or devices. Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface...Meer tonen
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
Art.-Nr.
1214170
Leveranciersnummer
835-46-M8-16-MT
EAN
4045525673731
Aantal
1 stuk
Hinges GN 128.2 are produced from drawn weldable profiled stainless steel extrusions. The pin is fixed in the lower half.
Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm,...Meer tonen
Cam Latches, Steel
Latches GN 119 lock by a turning operation clockwise (right), which moves the cam latch into the locked position behind the door frame. The latches have a pulling-in range of 10...Meer tonen
Latches GN 118 have a pulling-in range of 2 mm. They are available as a left and a right version, depending on whether the locking action is left or right.
Snap latches GN 449.4 combine the function of a gripping tray with that of a snap latch to provide an easy way to keep doors and covers closed. The mounting hole must be created...Meer tonen
The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected. This static load equals a thrust on the area of 0,4 N/mm2,...Meer tonen
Leveling feet GN 344 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.4 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.8 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen