Leveling feet GN 6311.4 are used for installing and leveling devices and equipment. The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the...Meer tonen
The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected. This static load equals a thrust on the area of 0,4 N/mm2,...Meer tonen
Leveling feet GN 344 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.3 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.4 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.8 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Ball catches GN 4490 are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining...Meer tonen
Insert bushings GN 348 offer the possibility of mounting screws in profiled square tubes. The bushings are held in place via the tapered plug-in section in the tube. The values...Meer tonen
Leveling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations. This has a positive impact on the lifetime of machines and...Meer tonen
Latches GN 115.6 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. Thanks to...Meer tonen
Latches GN 115.1 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. They are...Meer tonen
Sheet metal hinges GN 136 are available in many different versions and are suitable for light to medium-duty applications.
Latches GN 115 are locked by a rotation limited to 90°, which moves the latch arm into the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
With hinges GN 127 doors and covers can be positioned snugly and in a finely adjusted manner by moving the adjusting bushings. In this way, door gaps can be readjusted and...Meer tonen
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head. Thanks to...Meer tonen
The actuating torque of the hinges GN 233 can be adjusted via a setting screw, allowing doors and flaps to be kept open or partially open or closed. Endurance tests have shown...Meer tonen
Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the...Meer tonen
Hinges GN 122.1 with indexing positions keep the door in the three specified positions without additional mechanism. In indexing position the loosening torque is 1.1 Nm (test...Meer tonen
Heavy duty hinges GN 237.3 are designed for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in...Meer tonen
Hinges, Detachable, Zinc Die casting
Hinges GN 158 have a special feature in that they cannot be dismantled from the outside. The assembly is only possible from the inside. The pin is not accessible since it is...Meer tonen
Art.-Nr.
1217878
Leveranciersnummer
136-ST-40-40-B
EAN
4045525852617
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Leveling feet GN 344.2 feature a conductive ESD plastic material (PA) or rubber (NBR) which prevents static charges from building up. The imprint ESD-C on the surface of the...Meer tonen
Plates GN 2372 are designed as accessories for multiple families of hinges with dimensions that make additional threaded holes, nuts and washers unnecessary for mounting. This...Meer tonen