Raw magnets GN 55.1 are disk-shaped unshielded magnets. They can be easily and securely fastened using the bore or countersunk. If no suitable retaining magnets or magnet...Meer tonen
Raw magnets GN 55.2 are disk-shaped unshielded magnets. They can be fastened using adhesives, overcoats or by mechanical clamping. If no suitable retaining magnets or magnet...Meer tonen
Horizontally elongated heavy duty hinges GN 237.3 are designed for use under tough conditions. Attachment points with a wider spacing and more installation holes allow a more...Meer tonen
The dimensions of the threaded plugs GN 749 largely comply with DIN 908, and the outer diameter d2 is adapted to the threaded holes of pipe fittings as per DIN 3852. In...Meer tonen
Threaded shaft collars GN 706.3 correspond in outer dimensions to the semi-split shaft collars GN 706.2. The bore has, however, an internal thread so that the clamping ring can...Meer tonen
Art.-Nr.
1075998
Leveranciersnummer
300-78-M10-SW
EAN
4045525153035
Aantal
1 stuk
Art.-Nr.
1076002
Leveranciersnummer
300-92-M10-50-SW
EAN
4045525155855
Aantal
1 stuk
Star knobs GN 6336.1 with bushing have important advantages: The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding...Meer tonen
Edge protection seal profiles GN 2180 can be used to seal doors, covers and hatches. The profiles are pressed by hand onto the front of metal sheets and plates. The embedded...Meer tonen
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
The rotary clamping latches GN 516.5 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (loctite) or clamping is favoured. Type G has been designed for applications where the...Meer tonen
Stainless steel knobs GN 676.5 are used in applica-tions where a push or pull movement is required. Their concave top gives a more comfortable thumb grip. The knurled model...Meer tonen
The stroke of the square U-bolts of stainless steel latch type toggle clamps GN 851 can be adjusted within its range. In the clamped position the square U-bolt is parallel to...Meer tonen
The retaining magnets GN 51.4 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on...Meer tonen
Stainless Steel Wing Screws
Joints pieces GN 752 are designed to be used in combination with fork heads DIN 71752 respectively fork joints GN 751.
The retaining magnets GN 51.3 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on...Meer tonen
Art.-Nr.
1353719
Leveranciersnummer
839-50-M12-98
EAN
4045525385009
Aantal
1 stuk
Art.-Nr.
1484068
Leveranciersnummer
5337.2-25-M5-40
EAN
4045525669833
Aantal
1 stuk
Adjustable tension levers GN 212.3 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert...Meer tonen
Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors. The slot on the plunger side is provided for blind hole applications. A...Meer tonen
Carabiners GN 5299 are used, for example, to connect tools or other components quickly and without tools or to secure them against loss. The carabiner is opened by hand and...Meer tonen
Ball lock pins GN 113.8 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed...Meer tonen