Leveling feet GN 343.4 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Art.-Nr.
1476147
Leveranciersnummer
1580-M5-MT-E
EAN
4045525583450
Aantal
1 stuk
With hinges GN 127 doors and covers can be positioned snugly and in a finely adjusted manner by moving the adjusting bushings. In this way, door gaps can be readjusted and...Meer tonen
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head. Thanks to...Meer tonen
Hinges GN 237.1 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the fastening holes.
Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the...Meer tonen
Art.-Nr.
1476819
Leveranciersnummer
237.3-NI-80-80-B-GS
EAN
4045525538672
Aantal
1 stuk
Hinges, Plastic, White
The static load of the leveling feet GN GN 343.6 is limited by the load capacity of the ball joint / threaded stud (AISI 303). The static load values in the above table refer to...Meer tonen
Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. In the two-part design, the door can be...Meer tonen
Leveling feet GN 18 are particularly suitable for use in aggressive environments. The inclined surfaces for liquid runoff and the high surface quality of the base plate simplify...Meer tonen
Leveling feet GN 31 with vulcanised rubber (Types B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to...Meer tonen
Leveling feet GN 41 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...Meer tonen
Leveling feet GN 245 are known for their high static load capacity. The values given in the table regarding the static load capacity serve as a guide only and if these are...Meer tonen
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
Latches GN 115.1 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. They are...Meer tonen
Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm,...Meer tonen
Cam Latches, Steel
Latches GN 119 lock by a turning operation clockwise (right), which moves the cam latch into the locked position behind the door frame. The latches have a pulling-in range of 10...Meer tonen
Latches GN 118 have a pulling-in range of 2 mm. They are available as a left and a right version, depending on whether the locking action is left or right.
Snap latches GN 449.4 combine the function of a gripping tray with that of a snap latch to provide an easy way to keep doors and covers closed. The mounting hole must be created...Meer tonen
With GN 437.2 Hinges, doors and covers can be secured at any desired angular position. In its rest position, the hand lever is not connected to the locking thread of the hinge...Meer tonen
Hinges GN 437.4 with detent hold door and covers in the given indexing position without additional mechanics. This is particularly advantageous when machines and systems must be...Meer tonen
The specified load in the above table is a recommendation up to which the damping insert can be permanently subjected. This static load equals a thrust on the area of 0,4 N/mm2,...Meer tonen