Art.-Nr.
1334547
Leveranciersnummer
3245504
EAN
4016553245504
Aantal
1 stuk
Hinges GN 237 are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific...
Leveling feet GN 248 with damping element made of rubber are used to damp vibrations (oscillations) and shock movements. This has a positive influence on the life of a machine...Meer tonen
Insert bushing GN 448 offer the possibility of mounting screws in profiled tubes. They are held inside the tube by the slightly tapered insert section. The values given in the...Meer tonen
Horizontally elongated heavy duty hinges GN 237.3 are designed for use under tough conditions. Attachment points with a wider spacing and more installation holes allow a more...Meer tonen
Leveling feet GN 839 are used for applications in cases where no jointed link is required between foot and adjusting screw. The cross slot drive at the underside has been...Meer tonen
Art.-Nr.
1425758
Leveranciersnummer
3245702
EAN
4016553245702
Aantal
1 stuk
Latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
The rotary clamping latches GN 516.5 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm...Meer tonen
Hinges GN 237 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.
Leveling feet GN 33 will be delivered mounted and are not removable.
Leveling feet GN 31 with vulcanised rubber (Types B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to...Meer tonen
Leveling feet GN 344.5 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Art.-Nr.
1476137
Leveranciersnummer
1580-M4-MT-E
EAN
4045525583375
Aantal
1 stuk
Blechscharniere GN 136 sind in vielen unterschiedlichen Ausführungen erhältlich und eignen sich für leichte bis mittelschwere Anwendungen. Die Form A lässt sich außer durch...Meer tonen
Stainless steel ball catches GN 4490 are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. The stainless steel version is...Meer tonen
Stainless steel hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low...Meer tonen
Leveling feet GN 345 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 40 can be used in a host of combinations of base plates and adjustable spindle versions. The base plate with the rubber underlay protects sensitive surfaces and...Meer tonen
Leveling feet GN 32 will be delivered mounted and are not removable.
With stainless steel hinges GN 127 doors and covers can be positioned snugly and in a finely adjusted manner by moving the adjusting bushings. In this way, door gaps can be...Meer tonen
Leveling feet GN 439 are used for installing smaller machines, systems or devices. Thanks to the rubber underlay, they have a damping, noise-reducing effect and prevent surface...Meer tonen
Hinges GN 128 are produced from drawn weldable profiled steel extrusions. Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel...Meer tonen