Leveling feet GN 344 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.3 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.4 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.8 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Leveling feet GN 343.7 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a...Meer tonen
Ball pointed leveling feet GN 638 are suitable for universal use. For applications in aggressive environments or higher loads, the stainless steel versions are to be preferred....Meer tonen
Ball pointed leveling feet GN 638 are suitable for universal use. The designs with plastic thrust pad prevent damage to sensitive surfaces. For applications in aggressive...Meer tonen
Ball catches GN 4490 are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining...Meer tonen
Insert bushings GN 348 offer the possibility of mounting screws in profiled square tubes. The bushings are held in place via the tapered plug-in section in the tube. The values...Meer tonen
Latches GN 115.1 have smaller dimensions than standard latches GN 115, making them ideal for applications with limited space or requiring an unobtrusive appearance. They are...Meer tonen
Sheet metal hinges GN 136 are available in many different versions and are suitable for light to medium-duty applications.
Latches GN 115 are locked by a rotation limited to 90°, which moves the latch arm into the locked position behind the door frame. The bevels of the latch arm ease the closing of...Meer tonen
Art.-Nr.
1466644
Leveranciersnummer
127-ZD-76-60-HB-SR
EAN
4045525573536
Aantal
1 stuk
Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head. Thanks to...Meer tonen
Hinges GN 237.1 with horizontally elongated hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the fastening holes.
The actuating torque of the hinges GN 233 can be adjusted via a setting screw, allowing doors and flaps to be kept open or partially open or closed. Endurance tests have shown...Meer tonen
Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the...Meer tonen
Hinges GN 437.3 with a spring-loaded return allow doors to be automatically opened and closed by means of the torsion spring. The return torque varies with the hinge opening...Meer tonen
Hinges GN 122.1 with indexing positions keep the door in the three specified positions without additional mechanism. In indexing position the loosening torque is 1.1 Nm (test...Meer tonen
Hinges, Detachable, Zinc Die casting
Hinges GN 158 have a special feature in that they cannot be dismantled from the outside. The assembly is only possible from the inside. The pin is not accessible since it is...Meer tonen
Art.-Nr.
1191330
Leveranciersnummer
236-75-60
EAN
4045525519978
VPE (Verpakking)
2 stuk
Aantal
1 stuk
Art.-Nr.
1217878
Leveranciersnummer
136-ST-40-40-B
EAN
4045525852617
VPE (Verpakking)
10 stuk
Aantal
1 stuk
Leveling feet GN 344.2 feature a conductive ESD plastic material (PA) or rubber (NBR) which prevents static charges from building up. The imprint ESD-C on the surface of the...Meer tonen