Latches with cabinet U-handle GN 119.3 are used when the application requires both a locking mechanism and a handle. They lock by a turning operation clockwise (right), which...show more
Latches GN 115 are locked by a rotation limited to 90°, which moves the latch arm into the locked position behind the door frame. The bevels of the latch arm ease the closing of...show more
Leveling feet GN 45 are for use in aggressive environments. The range of combinations of base plates and adjustable spindle versions allows these leveling feet to be used in...show more
Leveling feet GN 839.5 are used for applications in cases where no jointed link is required between foot and adjusting screw. The cross slot drive at the underside has been...show more
Insert bushings GN 348 offer the possibility of mounting screws in profiled square tubes. The bushings are held in place via the tapered plug-in section in the tube. The values...show more
Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm,...show more
Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening...show more
Stellfüße GN 24 sind für den Einsatz in besonders aggressiven Umgebungen geeignet. Die Stellfüße werden montiert geliefert und sind nicht demontierbar.
Hinges GN 128.2 are produced from drawn weldable profiled stainless steel extrusions. The pin is fixed in the lower half.
Leveling feet GN 20 without mounting holes comply with the 3-A sanitary standard 88-01 and the DGUV Test guidelines, making them suitable for use in hygienic areas. The bottom...show more
Leveling feet GN 20 with mounting holes comply with the guidelines of the EHEDG, the 3-A sanitary standard 88-01 and the DGUV testing principles, making them extremely suitable...show more
Item-no.
1347628
Supplier number
339-29-M6-30-KR-NI
EAN
4045525962989
PU (Packaging)
4 Piece
Quantity
1 Piece
Item-no.
1347630
Supplier number
339-29-M6-45-KR-NI
EAN
4045525963313
PU (Packaging)
4 Piece
Quantity
1 Piece
Leveling feet GN 339 are used for applications in cases where no jointed link is required between foot and adjusting screw. For this reason they offer the advantage of reduced...show more
The setting screw in the stainless steel hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole...show more
The setting screw in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating...show more
The static load of the leveling feet GN 343.1 is limited by the load capacity of the ball joint (property class 5.8). The static load values in the table refer to a net vertical...show more
The static load of the leveling feet GN 343.2 is limited by the load capacity of the ball joint / threaded stud (property class 5.8). The static load values in the table refer...show more
Leveling feet GN 6311.4 are used for installing and leveling devices and equipment. The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the...show more
Leveling feet GN 6311.6 are used for installing and leveling devices and equipment. The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the...show more
Item-no.
1657726
Supplier number
6311.6-100-M16-59-R
EAN
4045525882348
Quantity
1 Piece
The specified load in the above table of the leveling feet GN 342.1 is a recommendation up to which the dampening element can be permanently subjected. This static load equals a...show more
Item-no.
1347802
Supplier number
343.6-25-M10-80-KRE
EAN
4045525026230
PU (Packaging)
4 Piece
Quantity
1 Piece
Item-no.
1347811
Supplier number
343.6-25-M6-50-KR
EAN
4045525026322
PU (Packaging)
4 Piece
Quantity
1 Piece